CYBLE-214015-01
AIROC™ Bluetooth® Low Energy module
General description
The AIRCO™ CYBLE-214015-01 is a fully certified and qualified module supporting Bluetooth® Low Energy wireless
communication. The CYBLE-214015-01 is a turnkey solution and includes onboard crystal oscillators, trace
antenna, passive components, and the PSoC™ 4 Bluetooth® LE. Refer to the PSoC™ 4 Bluetooth® LE datasheet
for additional details on the capabilities of the PSoC™ 4 Bluetooth® LE device used on this module.
The AIROC™ Bluetooth® LE module is a scalable and reconfigurable platform architecture. It combines
programmable and reconfigurable analog and digital blocks with flexible automatic routing. The
CYBLE-214015-01 also includes digital programmable logic, high-performance analog-to-digital conversion
(ADC), opamps with comparator mode, and standard communication and timing peripherals.
The CYBLE-214015-01 includes a royalty-free Bluetooth® LE stack compatible with Bluetooth® 4.2 and provides
up to 25 GPIOs in a small 11 × 11 × 1.80 mm package. The CYBLE-214015-01 is drop-in compatible with the
CYBLE-014008-00 AIROC™ Bluetooth® LE modules.
The CYBLE-214015-01 is a complete solution and an ideal fit for applications seeking a highly integrated
Bluetooth® LE wireless solution.
Features
• Module description
- Module size: 11.0 mm × 11.0 mm × 1.80 mm (with shield)
- Drop-in compatible with CYBLE-014008-00
- 256-KB flash memory, 32-KB SRAM memory
- Up to 25 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digial, or strong
output
- Bluetooth® 4.2 qualified single-mode module
• QDID: 79480
• Declaration ID: D032785
- Certified to FCC, CE, MIC, KC, and ISED regulations
- Industrial temperature range: –40°C to +85°C
- 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
- Watchdog timer with dedicated internal low-speed oscillator (ILO)
- Two-pin SWD for programming
• Power consumption
- TX output power: –18 dbm to +3 dbm
- Received signal strength indicator (RSSI) with 1-dB resolution
- TX current consumption of 15.6 mA (radio only, 0 dbm)
- RX current consumption of 16.4 mA (radio only)
- Low power mode support
• Deep Sleep: 1.3 µA with watch crystal oscillator (WCO) on
• Hibernate: 150 nA with SRAM retention
• Stop: 60 nA with XRES wakeup
• Programmable analog
- Four opamps with reconfigurable high-drive external and high-bandwidth internal drive, comparator modes,
and ADC input buffering capability; can operate in Deep Sleep mode
- 12-bit, 1-Msps SAR ADC with differential and single-ended modes; channel sequencer with signal averaging
- Two current DACs (IDACs) for general-purpose or capacitive sensing applications on any pin
- One low-power comparator that operate in Deep Sleep mode
Datasheet
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
page 1
002-15923 Rev. *G
2023-06-01