CYBLE-222005-00
EZ-BLE™ PRoC™ Module
EZ-BLE™ PRoC™ Module
■ Low power mode support
General Description
❐ Deep Sleep: 1.3 µA with watch crystal oscillator (WCO) on
❐ Hibernate: 150 nA with SRAM retention
❐ Stop: 60 nA with XRES wakeup
The Cypress CYBLE-222005-00 is a fully certified and qualified
module supporting Bluetooth Low Energy (BLE) wireless
communication. The CYBLE-222005-00 is a turnkey solution
and includes onboard crystal oscillators, chip antenna, passive
components, and Cypress PRoC™ BLE. Refer to the
CYBL1XX7X datasheet for additional details on the capabilities
of the PRoC BLE device used on this module.
Functional Capabilities
■ Up to 15 capacitive sensors for buttons or sliders with
best-in-class signal-to-noise ration (SNR) and liquid tolerance
■ 12-bit, 1-Msps SAR ADC with internal reference,
sample-and-hold (S/H), and channel sequencer
The CYBLE-222005-00 supports a number of peripheral
functions (ADC, timers, counters, PWM) and serial
communication protocols (I2C, UART, SPI) through its
programmable architecture. The CYBLE-222005-00 includes a
royalty-free BLE stack compatible with Bluetooth 4.1 and
provides up to 16 GPIOs in a small 10 × 10 × 1.80 mm package.
■ Two serial communication blocks (SCBs) supporting I2C
(master/slave), SPI (master/slave), or UART
■ Four dedicated 16-bit timer, counter, or PWM blocks
(TCPWMs)
The CYBLE-222005-00 is a complete solution and an ideal fit for
applications requiring BLE wireless connectivity.
■ Programmable low voltage detect (LVD) from 1.8 V to 4.5 V
■ I2S master interface
Module Description
■ Module size: 10.0 mm ×10.0 mm × 1.80 mm (with shield)
■ Bluetooth Low Energy protocol stack supporting generic
access profile (GAP) Central, Peripheral, Observer, or
Broadcaster roles
■ Drop-in compatible with CYBLE-022001-00 and includes
additional VREF input
■ Switches between Central and Peripheral roles on-the-go
■ 256-KB flash memory, 32-KB SRAM memory
■ Standard Bluetooth Low Energy profiles and services for
interoperability
■ Up to 16 GPIOs configurable as open drain high/low,
pull-up/pull-down, HI-Z analog, HI-Z digial, or strong output
■ Custom profile and service for specific use cases
■ Bluetooth 4.1 qualified single-mode module
❐ QDID: 79920
❐ Declaration ID: D029884
Benefits
The CYBLE-222005-00 module is provided as a turnkey
solution, including all necessary hardware required to use BLE
communication standards.
■ Certified to FCC, IC, MIC, KC, and CE regulations
❐ FCC ID: WAP2005
❐ IC ID: 7922A-2005
■ Proven, qualified, and certified hardware design ready to use
❐ MIC ID: 203-JN0495
❐ KC ID: MSIP-CRM-Cyp-2005
■ Small footprint (10 × 10 mm × 1.80 mm), perfect for space
constrained applications
■ Industrial temperature range: –40 °C to +85 °C
■ Reprogrammable architecture
■ 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit
multiply, operating at up to 48 MHz
■ Fully certified module eliminates the time needed for design,
development and certification processes
■ Watchdog timer with dedicated internal low-speed oscillator
(ILO)
■ Bluetooth SIG qualified with QDID and Declaration ID
(D029647)
■ Two-pin SWD for programming
■ Flexible communication protocol support
Power Consumption
■ PSoC Creator™ provides an easy-to-use integrated design
environment (IDE) to configure, develop, program, and test a
BLE application
■ TX output power: –18 dbm to +3 dbm
■ Received signal strength indicator (RSSI) with 1-dB resolution
■ TX current consumption of 15.6 mA (radio only, 0 dbm)
■ RX current consumption of 16.4 mA (radio only)
Cypress Semiconductor Corporation
Document Number: 002-00214 Rev. *G
198 Champion Court
San Jose, CA 95134-1709
408-943-2600
Revised December 22, 2017