CYBLE-012011-00
CYBLE-012012-10
EZ-BLETM PRoCTM Module
General Description
CYBLE-01201X-X0 is a Bluetooth Low Energy (BLE) wireless
module solution. The CYBLE-01201X-X0 is a turnkey solution
and includes onboard crystal oscillators, trace antenna, passive
components, and the Cypress PRoC BLE. Refer to the
CYBL10X6X datasheet for additional details on the capabilities
of the PRoC BLE device used on this module.
■ Low-power mode support
❐ Deep Sleep: 1.3 µA with watch crystal oscillator (WCO) on
❐ Hibernate: 150 nA with SRAM retention
❐ Stop: 60 nA with XRES wakeup
Functional Capabilities
The CYBLE-01201X-X0 supports a number of peripheral
functions (ADC, timers, counters, PWM) and serial
communication protocols (I2C, UART, SPI) through its
programmable architecture. The CYBLE-01201X-X0 includes a
royalty-free BLE stack compatible with Bluetooth 4.1 and
provides up to 23 GPIOs in a 14.52 × 19.20 × 2.00 mm package.
■ Up to 22 capacitive sensors for buttons or sliders with
best-in-class signal-to-noise ration (SNR) and liquid tolerance
■ 12-bit, 1-Msps SAR ADC with internal reference,
sample-and-hold (S/H), and channel sequencer
■ Two serial communication blocks (SCBs) supporting I2C
The CYBLE-01201X-X0 is available in a fully certified and
qualified version (CYBLE-012011-00), and an uncertified version
(CYBLE-012012-10). The CYBLE-012012-10 does not include
an RF shield and is not certified by Bluetooth SIG or regulatory
agencies.
(master/slave), SPI (master/slave), or UART
■ Four dedicated 16-bit timer, counter, or PWM blocks
(TCPWMs)
■ LCD drive supported on all GPIOs (common or segment)
■ Programmable low voltage detect (LVD) from 1.8 V to 4.5 V
■ I2S master interface
The CYBLE-01201X-X0 is a complete solution targeted at appli-
cations requiring cost optimized BLE wireless connectivity.
Module Description
■ Bluetooth Low Energy protocol stack supporting generic
access profile (GAP) Central, Peripheral, Observer, or
Broadcaster roles
■ Module size: 14.52 mm ×19.20 mm × 2.00 mm (with shield)
■ Castelated solder pad connections for ease-of-use
■ 128-KB flash memory, 16-KB SRAM memory
■ Switches between Central and Peripheral roles on-the-go
■ Standard Bluetooth Low Energy profiles and services for
interoperability
■ Up to 23 GPIOs configurable as open drain high/low,
pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output
■ Custom profile and service for specific use cases
■ Bluetooth 4.1 qualified single-mode module
❐ QDID: 79919 (CYBLE-012011-00 only)
❐ Declaration ID: D029885 (CYBLE-012011-00 only)
Benefits
The CYBLE-01201X-X0 module is provided as a turnkey
solution, including all necessary hardware required to use BLE
communication standards.
■ Certified to FCC, IC, MIC, KC, and CE regulations
■ Industrial temperature range: –40 °C to +85 °C
■ 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit
multiply, operating at up to 48 MHz
■ Proven hardware design ready to use
■ Cost optimized for applications without space constraint,
Footprint
❐ 14.52 × 19.20 mm × 2.00 mm - CYBLE-012011-00
❐ 14.52 × 19.20 mm × 1.55 mm - CYBLE-012012-10
■ Watchdog timer with dedicated internal low-speed oscillator
(ILO)
■ Two-pin SWD for programming
■ Reprogrammable architecture
Power Consumption
■ Fully certified module (CYBLE-012011-00) eliminates the time
needed for design, development and certification processes
■ TX output power: –18 dbm to +3 dbm
■ Received signal strength indicator (RSSI) with 1-dB resolution
■ TX current consumption of 15.6 mA (radio only, 0 dbm)
■ RX current consumption of 16.4 mA (radio only)
■ Bluetooth SIG qualified with QDID and Declaration ID
(CYBLE-012011-00 Only)
■ Flexible communication protocol support
■ PSoC Creator™ provides an easy-to-use integrated design
environment (IDE) to configure, develop, program, and test a
BLE application
Cypress Semiconductor Corporation
Document Number: 002-02521 Rev. *B
198 Champion Court
San Jose, CA 95134-1709
408-943-2600
Revised February 23, 2016