CY14V116F7
CY14V116G7
16-Mbit nvSRAM
with Asynchronous NAND Interface
16-Mbit nvSRAM with Asynchronous NAND Interface
Features
Functional Description
Cypress nvSRAM combines high-performance SRAM cells with
nonvolatile elements in a monolithic integrated circuit. The
■ 16-Mbit nonvolatile static random access memory (nvSRAM)
❐ Performance up to 33 MT/s per I/O
❐ Maximum data throughput using ×16 bus – 528 Mbps
❐ Industry-standard asynchronous NAND Flash interface with
reduced instruction set
❐ Shared address, data, and command bus
• Address and command bus is 8 bits
• Command is sent in one or two command cycles
• Address is sent in five address cycles
• Data bus width is ×8 or ×16 bits
embedded
nonvolatile
elements
incorporate
the
Silicon-Oxide-Nitride-Oxide-Silicon
(SONOS)
technology,
producing the world’s most reliable nonvolatile memory. The
SRAM can be read and written an infinite number of times. The
nonvolatile data resides in the nonvolatile elements and does not
change when data is written to the SRAM.
The CY14V116F7/CY14V116G7 nvSRAM provides access
through a standard asynchronous NAND interface and supports
the ×8 and ×16 interface options. In the case of ×16 interface,
data bytes are transmitted over the DQ[15:0] lines and has
double the throughput compared to the DQ[7:0] bus. The
CY14V116F7/ CY14V116G7 uses a highly multiplexed DQ bus
to transfer data, addresses, and instructions. All addresses and
commands are always transmitted over the data bus DQ[7:0].
Therefore, in the case of the ×16 bus interface, the upper eight
data bits DQ[15:8] become don’t care bits during the address and
command cycles. The CY14V116F7/CY14V116G7 uses five
control pins (CLE, ALE, CE, RE, and WE) to transfer command,
address, and data during read and write operations. Additional
I/O pins, such as write protect (WP), ready/busy (R/B), and HSB
STORE, are used to support features in the device.
■ Modes of operation:
❐ Asynchronous NAND Interface I/O with 30-ns access time
❐ Status Register with a software method for detecting the fol-
lowing:
• Nonvolatile STORE completion
• Pass/Fail condition of previous command
• Write protect status
■ Hands-off automatic STORE on power-down with only a small
capacitor
■ STORE to QuantumTrap nonvolatile elements is initiated by a
software command, a dedicated hardware pin, or AutoStore on
power-down
The asynchronous NAND interface nvSRAM is aligned to a
majority of the ONFI 1.0 specifications and supports data access
speed up to 33 MHz.
■ RECALL to SRAM initiated by software or power-up
■ High reliability
❐ Infinite read, write, and RECALL cycles
❐ 1 million STORE cycles to QuantumTrap
For a complete list of related documentation, click here.
■ Data retention: 20 years at 85 C
■ Operating voltage
❐ Core VCC = 2.7 V to 3.6 V; I/O VCCQ = 1.70 V to 1.95 V
■ 165-ball fine-pitch ball grid array (FBGA) package
■ Industrial temperature: –40 C to +85 C
■ Restriction of hazardous substances (RoHS) compliant
Cypress Semiconductor Corporation
Document Number: 001-75528 Rev. *K
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised January 5, 2018