Ultra Low Noise, Ultra Compact, Isolated type DC-DC Converter
b
6Watt BLC05 Series
■ Overview
The BLC series isolated-type DC-DC converters feature a small package
(23.2x21.1x9.7mm) and light weight (5.4g) capable of 6W output.
As ultralow noise and extremely high efficiency are made possible by a new circuit,
it is ideal for an analog circuit as well as an analog and digital hybrid circuit.
■ Features
- Ultra low noise
■Model/Rating
Table 1
Ripple
Noise
mVpp(typ.)
- Adjustable Output Voltage
- ON/OFF Control
- Dual power supply usable
as single power supply
- Withstand voltage AC500V
- Over Current Protection Circuit
- No tantalum capacitor or
electrolytic capacitor used
- Covered with a metal shield
- Surface Mount Package
- No heat sink needed
Models
BLC Series
Input V
Vdc
Output V
Vdc
Output I
mA
Line Reg. Load Reg.
mV(max.) mV(max.)
Efficiency
%(typ.)
BLC05-05S100
BLC05-12S50
BLC05-12W25
5
0 to 1000
20
40
80
40
8
8
8
77
80
80
4.5 to 9
12(15)
±12(±15)
0 to 500(400)
0 to 250(200)
100
600
Note 1: Output voltage in parentheses is when Vadj and –Vout are short-circuited.
Note 2: Output current in parentheses is at the maximum output voltage.
Note 3: Ripple noise and efficiency are at 5V input voltage and load rating.
Note 4: Ripple noise is measured at 20MHz bandwidth, with a multi layered ceramic capacitor with
10μF at input and 0.47μF at output
- Operating Temp Range
-40°C to +85°C
(Temperature derating required)
- RoHS Compliant
■ Specifications
Input voltage range
Rated output voltage
Adjustable output voltage range
Line regulation
Table 2
Refer to Table 1
5.0V±3%, 12V±3% , ±12V±5% (When Vadj terminal is open)
4.75 to 6.0V (5.0V model), 11.4 to 15V (12V model), ±11.4 to ±15V (±12V model)
Refer to Table 1 (Rated output, Input voltage varying in the range of Table 1)
Refer to Table 1 (Rated input/output, Load varying from 0 to 100%, ±output loaded evenly)
40mV typ.(5.0V model), 100mV typ. (12V model), 150mV typ. (±12V model)
(Rated input/output, for within ambient temperature range with 100% load at temperature derating)
Refer to Table 1 (Rated input/output, common temp, measurement frequency bandwidth 20MHz)
77% to 80% typ. (Rated input/output, Common temp., Refer to Table 1)
Operate at 105% or above of rated load current. Auto restart type.
None
Load regulation
Temperature regulation
Ripple noise
Efficiency
Over current protection
Over voltage protection
Under Voltage Lock Out
Input over current protection
Remote ON/OFF control
Standby current
Yes
None
Between 2Pin (-Vin) and 3Pin (ON/OFF): Output is ON when open, output is OFF when short.
4mA max.
Withstand voltage
Insulation resistance
Capacitance between P and S
Operating temp range
Storage temp range
Humidity range
Between input and output, input and case, output and case: AC500V/per minute.
Between input and output, input and case, output and case: 50MΩ or more (at DC500V)
Approx. 40 to 90pF (depending on the model)
Operating temperatures −40°C to +85°C (Refer to temp derating in the datasheet)
Storage temperatures -40°C to +85°C
20 to 95%R.H. (Max. wet bulb temp 35°C with no condensation)
Below 30°C/60% R.H. before mounting the converter
Storage conditions
Cooling conditions
Vibration
Natural cooling (install in a well-ventilated place)
10 to 55Hz Total amplitude 1.52mmp-p (2H for each of three directions) Sweep time 15 min
Acceleration 100G (3 times for each of three directions, total 18 times) Duration 6ms
5.4g typ.
Impact
Weight
Outer dimensions
W=23.2 L=21.1 H=9.7 typ.(mm)(For dimensional details, refer to the shape and dimensions in the
datasheet)
*The above specifications are provided with rated input/output and ambient temperature 25°C±5°C, unless otherwise specified.
*The contents provided in this datasheet may be changed at any time without prior notice.
1
DC-DC Converter
BDD20170524_A01