ARIZONA MICROTEK, INC.
AZ10EL89
ECL/PECL Coaxial Cable Driver
FEATURES
PACKAGE AVAILABILITY
•
•
•
•
•
375ps Propagation Delay
1.6V Output Swing
PACKAGE
SOIC 8
PART NO.
MARKING
Internal Input Pulldown Resistors
Operating Range of 4.2V to 5.7V
Direct Replacement for ON Semiconductor
MC10EL89
AZ10EL89D
AZM10EL89
SOIC 8 T&R
SOIC 8 T&R
AZ10EL89DR1 AZM10EL89
AZ10EL89DR2 AZM10EL89
•
Transistor Count = 29 devices
DESCRIPTION
The AZ10EL89 is a differential fanout gate specifically designed to drive coaxial cables. The device is
especially useful in Digital Video Broadcasting applications. For this application, since the system is polarity free,
each output can be used as an independent driver. The driver has a voltage gain of approximately 40 and produces
an output swing twice as large as standard ECL output. When driving a coaxial cable, proper termination is required
at both ends of the line to minimize signal loss. The 1.6 V output swing allows for termination at both ends of the
cable, while maintaining the required 800 mV swing at the receiving end of the cable. Because of the larger output
swings, the device cannot be terminated into the standard VCC -2.0V. All of the DC parameters are tested with a
50Ω to VCC -3.0V load. The driver accepts a standard differential ECL input and can run off of the Digital Video
Broadcast standard -5.0V supply. Under open input conditions (pulled to VEE) internal input clamps will force the
Qn output LOW.
NOTE: Specifications in ECL/PECL tables are valid when thermal equilibrium is established.
LOGIC DIAGRAM AND PINOUT ASSIGNMENT
1
2
3
4
8
VCC
D
PIN DESCRIPTION
FUNCTION
Q0
Q0
PIN
D, D¯
Data Inputs
7
6
Q0, Q¯¯0,Q1, Q¯¯1 Data Outputs (1.6VPP)
VCC
VEE
Positive Supply
Negative Supply
Q1
Q1
D
5
VEE
1630 S. STAPLEY DR., SUITE 125 • MESA, ARIZONA 85204 • USA • (480) 962-5881 • FAX (480) 890-2541
www.azmicrotek.com