AM08X5 Datasheet
AM08X5 Real-Time Clock Family
Ambi q Mi cr o超低功耗MCU、RTC芯片代理商:深圳擎鼎科技有限公司
系人: 小姐 箱:zhangkai yun@t - maxt ech. com
本公司将 您提供Demo、 品、开 料支持,并有
:13802700180 QQ: 249750140
的技 工程 助您 品。
用
Features
▪ Ultra-low supply current (all at 3V):
- 14 nA with RC oscillator
- 22 nA with RC oscillator and Autocalibration
- 55 nA with crystal oscillator
▪ Baseline timekeeping features:
- 32.768 kHz crystal oscillator with integrated
load capacitor/resistor
- Counters for hundredths, seconds, minutes,
hours, date, month, year, century, and week-
day
- Alarm capability on all counters
- Programmable output clock generation
(32.768 kHz to 1 year)
- Countdown timer with repeat function
- Automatic leap year calculation
▪ Advanced timekeeping features:
- Integrated power optimized RC oscillator
- Advanced crystal calibration to ± 2 ppm
- Advanced RC calibration to ± 16 ppm
- Automatic calibration of RC oscillator to crystal
oscillator
Applications
▪ Smart cards
▪ Wireless sensors and tags
▪ Medical electronics
▪ Utility meters
▪ Data loggers
▪ Appliances
▪ Handsets
▪ Consumer electronics
▪ Communications equipment
Description
- Watchdog timer with hardware reset
- Up to 256 bytes of general purpose RAM
▪ Power management features:
- Automatic switchover to VBAT
- External interrupt monitor
The Ambiq Micro AM08X5 Real Time Clock family
provides a groundbreaking combination of ultra-low
power coupled with a highly sophisticated feature
set. With power requirements significantly lower than
any other industry RTC (as low as 14 nA), these are
the first semiconductors based on Ambiq Micro’s
- Programmable low battery detection threshold
- Programmable analog voltage comparator
TM
innovative SPOT (Subthreshold Power Optimized
2
▪ I C (up to 400 kHz) and 3-wire or 4-wire SPI (up
Technology) CMOS platform. The AM08X5 includes
on-chip oscillators to provide minimum power
consumption, full RTC functions including battery
backup and programmable counters and alarms for
to 2 MHz) serial interfaces available
▪ Operating voltage 1.5-3.6 V
▪ Clock and RAM retention voltage 1.5-3.6 V
▪ Operating temperature –40 to 85 °C
▪ All inputs include Schmitt Triggers
▪ 3x3 mm QFN-16 package
2
timer and watchdog functions, and either an I C or
SPI serial interface for communication with a host
controller.
▪ Also available in wafer form
Ambiq Micro Inc.
www.ambiqmicro.com
11305 Four Points Drive, Building 2, Suite 250
Austin, TX 78726
2014 Ambiq Micro, Inc.
April 2014