Data Sheet: JN516x
IEEE802.15.4 Wireless Microcontroller
Features: Radio
Overview
•
2.4GHz IEEE802.15.4 compliant
The JN516x series is a range of ultra low power, high performance wireless
microcontrollers supporting JenNet-IP, ZigBee PRO or RF4CE networking
stacks to facilitate the development of Home Automation, Smart Energy,
Light Link and Remote control applications. They feature an enhanced 32-
bit RISC processor with embedded Flash and EEPROM memory, offering
high coding efficiency through variable width instructions, a multi-stage
instruction pipeline and low power operation with programmable clock
speeds. They also include a 2.4GHz IEEE802.15.4 compliant transceiver
and a comprehensive mix of analogue and digital peripherals. Three
memory configurations are available to suit different applications. The best
in class operating current of 15mA, with a 0.6uA sleep timer mode, gives
excellent battery life allowing operation direct from a coin cell.
•
•
128-bit AES security processor
MAC accelerator with packet
formatting, CRCs, address check,
auto-acks, timers
•
Integrated ultra low power sleep
oscillator – 0.6µA
•
•
2.0V to 3.6V battery operation
Deep sleep current 0.12µA (Wake-up
from IO)
•
•
•
•
•
•
<$0.15 external component cost
RX current 17mA , TX 15mA
Receiver sensitivity -95dBm
Transmit power 2.5dBm
The peripherals support a wide range of applications. They include a 2-wire
I2C, and SPI ports which can operate as either master or slave, a four
channel ADC with battery and a temperature sensor. It can support a large
switch matrix of up to 100 elements, or alternatively a 20 key capacitive
touch pad.
Time of Flight engine for ranging
Antenna Diversity (Auto RX)
Features: Microcontroller
Block Diagram
•
32-bit RISC CPU, 1 to 32MHz clock
speed
SPI
Watchdog
Timer
RAM
8/32K
Flash
64/160/256K
•
Variable instruction width for high
coding efficiency
Master & Slave
2-Wire Serial
(Master/Slave)
Voltage Brownout
2.4GHz
Radio
•
•
•
•
Multi-stage instruction pipeline
JN5161: 64kB/8kB/4kB
32-bit
4xPWM + Timer
2xUART
RISC CPU
O-QPSK
Modem
Including
Diversity
JN5164: 160kB/32kB/4kB
4kB
20 DIO
JN5168: 256kB/32kB/4kB
(Flash/RAM/EEPROM)
EEPROM
IEEE 802.15.4
Baseband
Sleep Counter
XTAL
•
•
•
Data EEPROM with guaranteed 100k
write operations.
Processor
4-Channel
10-bit ADC
128-bit AES
Hardware
Encryption
Power
RF4CE, JenNet-IP, ZigBee SE and
ZigBee Light Link stacks
Battery and
Management
Temp Sensors
2-wire I2C compatible serial interface.
Can operate as either master or slave
•
•
•
•
•
5xPWM (4x timer & 1 timer/counter)
2 low power sleep counters
2x UART
Benefits
Applications
•
•
•
•
Single chip device to run
stack and application
•
Robust and secure low power
wireless applications
SPI Master & Slave port, 3 selects
Supply voltage monitor with 8
programmable thresholds
Very low current solution for
long battery life – over 10 yrs
•
•
•
•
•
•
•
•
RF4CE Remote Controls
JenNet-IP networks
•
•
•
•
•
4-input 10-bit ADC, comparator
Battery and temperature sensors
Watchdog & Brown Out Reset
Up to 20 Digital IO Pins (DIO)
Infra-red remote control transmitter
Supports multiple network
stacks
ZigBee SE networks
ZigBee Light Link networks
Lighting & Home automation
Toys and gaming peripherals
Smart Energy
Highly featured 32-bit RISC
CPU for high performance
and low power
•
•
System BOM is low in
component count and cost
Temp range (-40°C to +125°C)
6x6mm 40-lead
Lead-free and RoHS compliant
Energy harvesting, for
example self powered light
switch
Flexible sensor interfacing
options
© NXP Laboratories UK 2013
JN-DS-JN516x v1.3 Production
1