ZSSC1750 / ZSSC1751
Data Acquisition
Datasheet
System Basis Chip
Brief Description
Benefits
The ZSSC1750 and ZSSC1751 are System Basis
Chips (SBCs) with a dual-channel ADC for battery
sensing/management in automotive, industrial, and
medical systems. The ZSSC1750 and ZSSC1751
feature an SPI interface; in addition, the ZSSC1750
has an integrated LIN 2.1 transceiver.
•
Integrated, precision measurement solution for
accurate prediction of battery state of health
(SOH), state of charge (SOC), or state of
function (SOF)
•
Robust power-on-reset (POR) concept for harsh
automotive environments
One of the two input channels measures the battery
current IBAT via the voltage drop at the external shunt
resistor. The second channel measures the battery
voltage VBAT and the temperature.
•
•
•
•
•
On-chip precision oscillator accuracy: ±1%
On-chip low-power oscillator
Only a few external components needed
Easy communication via SPI interface
By simultaneously measuring VBAT and IBAT, it is
possible to determine dynamically the internal
resistance of the battery, Rdi, which is correlated
with the state-of-health (SOH) of the battery. By
integrating IBAT, it is possible to determine the state-
of-charge (SOC) and the state-of-function (SOF) of
the battery.
Power supply, interrupt, and reset signals for
external microcontroller
•
•
Watchdog timer with dedicated oscillator
Industry’s smallest footprint allows minimal
module size and cost
•
AEC-Q100 qualified solution
During Sleep Mode, the system makes periodic
measurements to monitor the discharge of the
battery. Measurement cycles are controlled by user
software and include various wake-up conditions.
The ZSSC1750/51 is optimized for ultra-low power
consumption drawing only 60µA or less in this mode.
Available Support
•
•
Evaluation Kit
Application Notes
Physical Characteristics
Features
•
•
•
Operation temperature up to -40°C to +125°C
Supply voltage: 4.2 to 18V
•
Two high-precision 24-bit sigma-delta ADCs
(18-bit with no missing codes);
Small footprint package: PQFN36 6x6 mm
sample rate: 1Hz to 16kHz
* FSR = full-scale range.
•
•
On-chip voltage reference (5ppm/K typical)
Current channel
Basic ZSSC1750/51 Application Circuit
.
.
.
.
IBAT offset error: ≤ 10mA
To Harness
IBAT resolution: ≤ 1mA
-
+
Car Chassis Ground
Programmable gain: 4 to 512
Max. differential input stage input range: ±300mV
3.3V, <30mA
LIN-I/F
(ZSSC1750 )
VDDP
LIN
VBAT
VDDE
•
•
Voltage channel
INP
INN
VDDA
.
.
Input range: 4 to 28.8V
RX
TX
VDD
Voltage accuracy: ±60ppm FSR* = 1.73mV
Rshunt
IRQN
MCU_RSTN
MCU_CLK
IRQ
RST
CLK (opt.)
Interface
to Host
(e.g. CAN)
Temperature channel
.
.
External temperature sensor (NTC)
NTH
I/F
ZSSC1750/51
SPI
VSSE
µC
Factory-calibrated internal temp. sensor: ±2°C
NTC
+
-
SPI
NTL
VSSA
Battery
•
•
LIN 2.1/SAE J2602-1 transceiver (ZSSC1750 only)
Typical current consumption
VSS
.
.
Normal Mode: 12mA
Sleep Mode: ≤ 60µA
© 2016 Integrated Device Technology, Inc.
1
April 20, 2016