®
®
INNOVATION and EXCELLENCE
Single Output
UNR Series
Non-Isolated, 1.2/1.5/1.8/2.5/3.3VOUT
8 and 10 Amp DC/DC Converters
As supply voltages trend lower and load currents increase, centralized power
becomes more impractical. The tight accuracy, low noise and quick transient
response demanded by today's low voltage CPU's, ASIC's and DSP's make power
processing at the point of use the only viable solution. The UNR 12-33W series
provides a complete line of non-isolated DC/DC converters to satisfy this require-
ment. With input voltages of 5V (-D5 models) and 12V (-D12 models) these convert-
ers offer standard output voltages of 1.2, 1.5, 1.8, 2.5 and 3.3 Volts and up to
10 Amps of output current in both through-hole and surface-mount 1" x 2" metal
cases.
Features
Input ranges of 4.75-5.5V or 10.8-13.6V
Output voltages of 1.2/1.5/1.8/2.5/3.3V
8 and 10 Amp output current models
VOUT user-trimmable from 1.28V to 3.6V
Non-isolated, full synchronous topology
1" x 2" through-hole or SMT package
With on/off control and output voltage trim capability as standard features, these
non-isolated converters exploit full synchronous rectification, planar magnetics, and
100% automated assembly to deliver high efficiencies (to 91%) and low noise at
low cost.
Gull-wing leads/standard reflow for SMT
High efficiency to 91%; Low noise
340kHz switching; Planar magnetics
These versatile DC/DC’s are fully line and load regulated. They feature quick
transient response (50µsec), user-optional on/off control (for power sequencing),
and output overcurrent detection and shutdown ("hiccup" technique with auto-
recovery). Their impressive guaranteed efficiencies enable them to deliver fully rated
output power from –40 to +50/55°C (ambient) without supplemental cooling.
If your high current requirements have made the use of inefficient linear regula-
tors impractical, take a look at one of DATEL’s new switching buck regulators. Their
high efficiency, ease-of-use, long-term reliability, and overall cost effectiveness will
impress you. Safety agency approvals and EMC characterizations are currently in
progress.
–40 to +40/50/60°C ambient operation with
no derating
Remote on/off control; Output overcurrent
detection
IEC950/EN60950/UL1950 approval
+VIN
+VOUT
INPUT
RETURN
OUTPUT
RETURN
➀
LOGIC
GROUND
VOLTAGE
BOOST
OVERCURRENT
DETECTION
+VCC
ON/OFF
CONTROL
PWM
CONTROLLER
REFERENCE &
ERROR AMP
V
OUT
TRIM
➀ -D5 models only.
Figure 1. Simplified Schematic
DATEL, Inc., Mansfield, MA 02048 (USA) • Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356
•
Email: sales@datel.com • Internet: www.datel.com