UMFT51AA-01 Datasheet
Version 1.0
Document Reference No.: FT_001141
Clearance No.: FTDI# 479
4.2 Signal Descriptions
Pin No.
Name
Type
Description
Port 1 pins, P1.0 to P1.7 (DIO0 to DIO7). All FT51A
digital functions can be mixed to these pins; however
ADC features are not available for these pins. These
pins are 5 volt tolerant.
CN1-1 to CN1-8
Port 1
I/O Signals
Port 3 pins, P3.0 to P3.7 (DIO8 to DIO15). AllFT51A
digital functions can be mixed to these pins; however
ADC features are not available for these pins. These
pins are 5 volt tolerant.
CN1-10 to CN1-17
CN2-21 to CN2-13
CN2-2 to CN2-9
Port 3
Port 2
Port 0
I/O Signals
I/O Signals
I/O Signals
Port 2 pins, P2.0 to P2.7 (AIO8 to AIO15). ADC features
are available for these pins however these pinsare not
suitable for high frequency data transfers such as SPI.
These pins are not 5 volt tolerant.
Port 0 pins, P2.0 to P0.7 (AIO8 to AIO15). ADC features
are available for these pins however these pinsare not
suitable for high frequency data transfers such as SPI.
These pins are not 5 volt tolerant.
CN1-9
RST
Reset Pin
Ground
Active high reset.
Ground 0 volts.
CN1-20
GND
5 volt power input whenJP1 is open, 5 volt power
output when JP1 is closed andconnected to upstream
USB port.
CN2-1
VCC5V
Power
Not
CN1-18 to CN1-19
CN2-10 to CN2-12
NC
NC
Floating pin.
Connected
Not
Floating pin.
Connected
Table 4.1 – Module Pin Out Description
Pin No.
CN4-1
CN4-2
CN4-3
CN4-4
Name
VBUS
DM
Type
Description
Power
Signal
Signal
Ground
5 volt power input. To enable bus powermode close JP1
USB Data - from upstream device
USB Data + from upstreamdevice
0 volt ground.
DP
GND
Table 4.2 – Upstream USB Port Pin Out Description
Copyright © 2015 Future Technology Devices International Limited
6