APPLICABLE STANDARD
UL1863
Operating
Temperature Range
Rating
Storage
Temperature Range
-55 C to 85 C (note 1)
-25 C to 60 C
56.5 V DC
Voltage
100m A
Current
Working voltage 150 V max
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
X
X
X
Marking
ELECTRIC CHARACTERISTICS
230 m max.
Contact Resistance
100 mA max (DC or 1000 Hz).
X
X
(One example connector configuration is shown.)
100 V DC.
Insulation Resistance
Voltage Proof
100 M min.
No flashover or breakdown.
X
X
X
X
500 V AC for 1 min.
MECHANICAL CHARACTERISTICS
Mechanical Operation
200 times insertions and extractions.
1) Contact resistance: 250 m max.
X
-
2) No damage, crack and looseness of parts.
Vibration
Frequency 10 to 55 Hz, single amplitude 0.75 mm,
at 5 min/cycle, 10 cycles.
490 m/s2 duration of pulse 11 ms for 3 times in 3 both
1) No electrical discontinuity of 5 s.
2) Contact resistance: 250 m max.
3) No damage, crack and looseness of parts.
X
X
X
-
-
-
Shock
axial directions.
Rubber Probe Insertion
Rubber probe φ6.9 ± 0.5 mm, insertions.
(test standard:UL1863)
No breakdown.(at extractions)
ENVIRONMENTAL CHARACTERISTICS
Damp Heat
Exposed at 40 C, 90 ~ 95 , 500 h.
1) Contact resistance: 250 m max.
2) Insulation resistance:
X
-
-
(Steady State)
1 M min. (at high humidity)
10 M min. (at dry)
3) No damage, crack and looseness of parts
1) Contact resistance: 250 m max.
2) Insulation resistance: 100 M min.
3) No damage, crack and looseness of parts.
1) Contact resistance: 250 m max.
2) No heavy corrosion.
Rapid Change of Temperature Temperature -55±3 → 5 to 35 → 85±2 → 5 to 35 C
Time 30 to 35 → 5 max → 30 to 35 → 5 max min
X
Under 5 cycles.
Corrosion Salt Mist
Resistance to Soldering Heat
Solderability
Exposed in 5 % salt water spray for 48 h.
X
X
X
-
-
-
Solder temperature, 260 ± 5 C for immersion,
duration 10±1 s.
No deformation of case and excessive looseness of
the terminals.
Soldered at solder temperature, 245±2 C
for immersion, duration 3±1 s.
Min. 95 % of solder immersed area shall be
covered new solder coating.
Note 1. The operation temperature includes the rise by current carrying.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
KIM JAEHYEON
CHECKED
DATE
1
△
2
DIS-E-00002925
TU.TANIGUCHI
RI.TAKAYASU
AH.KODAMA
20200326
20180608
20180608
20180607
20180607
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
MO.SHIMOYAMA
AK.AKIYAMA
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-047291-50-00
TM11RX-5C-88(50)
PART NO.
CODE NO.
SPECIFICATION SHEET
1
1/1
HIROSE ELECTRIC CO., LTD.
△
CL222-5133-5-50
FORM HD0011-2-1