TL16CP754C, TL16CM754C, TL16C754C
www.ti.com
SLLS644E –DECEMBER 2007–REVISED MAY 2010
QUAD UARTS WITH 64-BYTE FIFO
Check for Samples: TL16CP754C, TL16CM754C, TL16C754C
1
FEATURES
•
•
•
•
•
•
ST16C654/654D Pin Compatible With
Additional Enhancements
•
•
•
RS-485 Mode Support
Support 1.8-V, 2.5-V, 3.3-V, or 5-V Supply
Support up to 24-MHz Crystal Input Clock
(1.5 Mbps)
Characterized for Operation From –40°C to
85°C, Available in Commercial and Industrial
Temperature Grades
Support up to 48-MHz Oscillator Input Clock
(3 Mbps) for 5-V Operation
•
•
Software-Selectable Baud-Rate Generator
Support up to 32-MHz Oscillator Input Clock
(2 Mbps) for 3.3-V Operation
Prescalable Provides Additional Divide-by-4
Function
Support up to 24-MHz Input Clock (1.5 Mbps)
for 2.5-V Operation
•
•
Programmable Sleep Mode
Programmable Serial Interface Characteristics
Support up to 16-MHz Input Clock (1 Mbps) for
1.8-V Operation
–
–
5-, 6-, 7-, or 8-Bit Characters
Even, Odd, or No Parity Bit Generation and
Detection
•
•
•
64-Byte Transmit FIFO
64-Byte Receive FIFO With Error Flags
–
1-, 1.5-, or 2-Stop Bit Generation
Programmable and Selectable Transmit and
Receive FIFO Trigger Levels for DMA and
Interrupt Generation
•
•
False Start Bit Detection
Complete Status Reporting Capabilities in
Both Normal and Sleep Mode
•
•
Programmable Receive FIFO Trigger Levels for
Software/Hardware Flow Control
•
•
•
•
Line Break Generation and Detection
Internal Test and Loopback Capabilities
Fully Prioritized Interrupt System Controls
Software/Hardware Flow Control
–
–
Programmable Xon/Xoff Characters
Modem Control Functions (CTS, RTS, DSR,
DTR, RI, and CD)
Programmable Auto-RTS and Auto-CTS
•
•
Optional Data Flow Resume by Xon Any
Character
•
IrDA Capability
DMA Signaling Capability for Both Received
and Transmitted Data on PN Package
DESCRIPTION
The '754C is a quad universal asynchronous receiver/transmitter (UART) with 64-byte FIFOs, automatic
hardware/software flow control, and data rates up to 3 Mbps. It incorporates the functionality of four UARTs, each
UART having its own register set and FIFOs. The four UARTs share only the data bus interface and clock
source, otherwise they operate independently. Another name for the UART function is Asynchronous
Communications Element (ACE), and these terms are used interchangeably. The bulk of this document
describes the behavior of each ACE, with the understanding that four such devices are incorporated into the
'754C. The '754C offers enhanced features. It has a transmission control register (TCR) that stores received
FIFO threshold level to start/stop transmission during hardware and software flow control. With the FIFO RDY
register, the software gets the status of TXRDY/RXRDY for all four ports in one access. On-chip status registers
provide the user with error indications, operational status, and modem interface control. System interrupts may
be tailored to meet user requirements. An internal loopback capability allows onboard diagnostics.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2007–2010, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
5秒后页面跳转
SL74HC10N：高性能三输入与非门解析
AIC1781A 电池充电控制器深度解析
Pickering新高压舌簧继电器亮相汽车测试博览会
采用MCU+MPU双处理器架构实现的创新应用设计探索
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
