NV25128WF
EEPROM Serial 128-Kb SPI
Automotive Grade 1
inꢀWettable Flank UDFN-8
Package
www.onsemi.com
Description
The NV25128 is a EEPROM Serial 128−Kb SPI Automotive
Grade 1 device internally organized as 16Kx8 bits. This features
a 64−byte page write buffer and supports the Serial Peripheral
Interface (SPI) protocol. The device is enabled through a Chip Select
(CS) input. In addition, the required bus signals are clock input (SCK),
data input (SI) and data output (SO) lines. The HOLD input may be
used to pause any serial communication with the NV25128 device.
The device features software and hardware write protection, including
partial as well as full array protection.
1
UDFN8
(Wettable Flank)
MUW3 SUFFIX
CASE 517DH
On−Chip ECC (Error Correction Code) makes the device suitable
for high reliability applications.
PIN CONFIGURATION
V
CS
SO
1
CC
Features
HOLD
SCK
SI
• Automotive Temperature Grade 1 (−40°C to +125°C)
• 10 MHz (5 V) SPI Compatible
• 2.5 V to 5.5 V Supply Voltage Range
• SPI Modes (0,0) & (1,1)
WP
V
SS
UDFN8 (MUW3)
(Top View)
• 64−byte Page Write Buffer
• Additional Identification Page with Permanent Write Protection
• Self−timed Write Cycle
PIN FUNCTION
Pin Name
Function
Chip Select
• Hardware and Software Protection
• Block Write Protection
CS
SO
WP
Serial Data Output
Write Protect
− Protect 1/4, 1/2 or Entire EEPROM Array
• Low Power CMOS Technology
V
SS
Ground
• 1,000,000 Program/Erase Cycles
• 100 Year Data Retention
SI
Serial Data Input
Serial Clock
• 8−pad Wettable Flank UDFN 2x3 mm Package
• This Device is Pb−Free, Halogen Free/BFR Free, and RoHS
Compliant
SCK
HOLD
Hold Transmission Input
Power Supply
V
CC
V
CC
SI
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
CS
SO
NV25128WF
WP
HOLD
SCK
V
SS
Figure 1. Functional Symbol
© Semiconductor Components Industries, LLC, 2018
1
Publication Order Number:
June, 2018 − Rev. 1
NV25128WF/D