NLSX5002
2-Bit 100 Mb/s Configurable
Dual-Supply Level
Translator
The NLSX5002 is a 2-bit configurable dual-supply autosensing
bidirectional level translator that does not require a direction control
http://onsemi.com
pin. The I/O V - and I/O V -ports are designed to track two
CC
L
MARKING
DIAGRAM
different power supply rails, V and V respectively. Both the V
CC
L
CC
and the V supply rails are configurable from 0.9 V to 4.5 V. This
L
allows a logic signal on the V side to be translated to either a higher
L
UQFN8
MU SUFFIX
CASE 523AS
AM
1
or a lower logic signal voltage on the V side, and vice-versa.
CC
The NLSX5002 offers the feature that the values of the V and
CC
V
supplies are independent. Design flexibility is maximized
L
A
M
= Specific Device Code
= Date Code
because V can be set to a value either greater than or less than the
L
V
CC
supply. In contrast, the majority of competitive auto sense
translators have a restriction that the value of the V supply must be
L
equal to less than (V - 0.4) V.
CC
The NLSX5002 has high output current capability, which allows
the translator to drive high capacitive loads such as most high
frequency EMI filters. Another feature of the NLSX5002 is that each
ORDERING INFORMATION
†
Device
Package
Shipping
I/O_V and I/O_V
output.
channel can function as either an input or an
NLSX5002BMUTCG UQFN8 3000/Tape & Reel
Ln
CCn
(Pb−Free)
An Output Enable (EN) input is available to reduce the power
consumption. The EN pin can be used to disable both I/O ports by
putting them in 3-state which significantly reduces the supply current
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
from both V and V . The EN signal is referenced to the V supply.
CC
L
L
Features
• Wide V , V Operating Range: 0.9 V to 4.5 V
CC
L
• V and V are independent
L
CC
− V may be greater than, equal to, or less than V
L
CC
• High−Speed with 140 Mb/s Guaranteed Date Rate
for V , V > 1.8 V
CC
L
• Low Bit−to−Bit Skew
• Overvoltage Tolerant Enable and I/O Pins
• Non−Preferential Power−Up Sequencing
• Power−Off Protection
• Small Packaging: UQFN8, 1.4 mm x 1.2 mm, 0.4 mm Pitch
• These Devices are Pb−Free and are RoHS Compliant
Typical Applications
• Mobile Phones, PDAs, Other Portable Devices
Important Information
• ESD Protection for All Pins:
♦ HBM (Human Body Model) > 8000 V
♦ MM (Machine Model) > 400 V
©
Semiconductor Components Industries, LLC, 2012
1
Publication Order Number:
April, 2012 − Rev. 0
NLSX5002/D