NCP5392P
2/3/4-Phase Controller for
CPU Applications
The NCP5392P provides up to a four-phase buck solution which
combines differential voltage sensing, differential phase current
sensing, and adaptive voltage positioning to provide accurately
regulated power for both Intel and AMD processors. Dual-edge
pulse-width modulation (PWM) combined with inductor current
sensing reduces system cost by providing the fastest initial response
to dynamic load events. Dual-edge multiphase modulation reduces
the total bulk and ceramic output capacitance required to meet
transient regulation specifications.
http://onsemi.com
MARKING
DIAGRAM
1
A high performance operational error amplifier is provided to
simplify compensation of the system. Dynamic Reference Injection
further simplifies loop compensation by eliminating the need to
compromise between closed-loop transient response and Dynamic
VID performance.
1
40
NCP5392P
AWLYYWWG
40 PIN QFN, 6x6
MN SUFFIX
CASE 488AR
In addition, NCP5392P provides an automatic power saving
feature (Auto-PSI). When Auto-PSI function is enabled, NCP5392P
will automatically detect the VID transitions and direct the Vcore
regulator in or out of low power states. As a result, the best efficiency
scheme is always chosen.
NCP5392P = Specific Device
Code
A
= Assembly Location
= Wafer Lot
= Year
WL
YY
WW
G
= Work Week
= Pb-Free Package
Features
•ꢀMeets Intel's VR11.1 Specifications
*Pin 41 is the thermal pad on the bottom of the device.
•ꢀMeets AMD 6 Bit Code Specifications
•ꢀDual-edge PWM for Fastest Initial Response to Transient Loading
•ꢀHigh Performance Operational Error Amplifier
•ꢀInternal Soft Start
•ꢀDynamic Reference Injection (Patent #US07057381)
•ꢀDAC Range from 0.375 V to 1.6 V
•ꢀDAC Feed Forward Function (Patent Pending)
•ꢀ 0.5% DAC Voltage Accuracy from 1.0 V to 1.6 V
•ꢀTrue Differential Remote Voltage Sensing Amplifier
•ꢀPhase-to-Phase Current Balancing
ORDERING INFORMATION
†
Device
Package
Shipping
NCP5392PMNR2G* QFN-40 2500/Tape & Reel
(Pb-Free)
*TemperatureRange: 0°C to 85°C
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
•ꢀ“Lossless” Differential Inductor Current Sensing
•ꢀDifferential Current Sense Amplifiers for each Phase
•ꢀAdaptive Voltage Positioning (AVP)
•ꢀOscillator Frequency Range of 100 kHz – 1 MHz
•ꢀLatched Over Voltage Protection (OVP)
•ꢀGuaranteed Startup into Pre-Charged Loads
•ꢀThreshold Sensitive Enable Pin for VTT Sensing
•ꢀPower Good Output with Internal Delays
•ꢀThermally Compensated Current Monitoring
•ꢀAutomatic Power Saving (AUTO PSI Mode)
•ꢀCompatible to PSI Power Saving Requirements
•ꢀThis is a Pb-Free Device
Applications
•ꢀDesktop Processors
©ꢀ Semiconductor Components Industries, LLC, 2008
April, 2008 - Rev. 0
1
Publication Order Number:
NCP5392P/D