NCP5395
Product Preview
2/3/4-Phase Controller with
On Board Gate Drivers for
CPU Applications
The NCP5395 provides up to a four−phase buck solution which
combines differential voltage sensing, differential phase current
sensing, adaptive voltage positioning, and on board gate drivers.
Dual−edge pulse−width modulation (PWM) combined with inductor
current sensing reduces system cost by providing the fastest initial
response to dynamic load events. Dual−edge multiphase modulation
reduces the total bulk and ceramic output capacitance required to meet
transient regulation specifications.
http://onsemi.com
1
48
QFN48
CASE 485K
PLASTIC
The on board gate drivers includes adaptive non overlap and power
saving operation. A high performance operational error amplifier is
provided to simplify compensation of the system. Patented Dynamic
Reference Injection further simplifies loop compensation by
eliminating the need to compromise between closed−loop transient
MARKING DIAGRAM
48
response and Dynamic V performance.
1
ID
Features
NCP5395
AWLYYWWG
• Meets Intel’s VR11.1 Specifications
• Meets AMD 6 Bit Code Specifications
• Dual−edge PWM for Fastest Initial Response to Transient Loading
• High Performance Operational Error Amplifier
• Internal Soft Start
A
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
WL
YY
WW
G
• Dynamic Reference Injection (Patent #US07057381)
• DAC Range from 0.5 V to 1.6 V
• DAC Feed Forward Function (Patient Pending)
•
0.5% DAC Voltage Accuracy from 1.0 V to 1.6 V
48
• True Differential Remote Voltage Sensing Amplifier
• Phase−to−Phase Current Balancing
1
BG1
BG3
PSI
G4
VID0
VRRDY
EN
• “Lossless” Differential Inductor Current Sensing
• Differential Current Sense Amplifiers for Each Phase
• Adaptive Voltage Positioning (AVP)
• Oscillator Frequency Range of 125 kHz − 1 MHz
• Latched Over Voltage Protection (OVP)
VID1
CS1N
CS1P
CS2N
CS2P
CS3N
CS3P
CS4N
CS4P
VID2
AGND
Down−bonded to
Exposed Flag
VID3
VID4
VID5
VID6
VID7/AMD
ROSC
ILIM
• Guaranteed Startup into Pre−Charged Loads
• Threshold Sensitive Enable Pin for VTT Sensing
• Power Good Output with Internal Delays
• Thermally Compensated Current Monitoring
• Thermal Shutdown Protection
ORDERING INFORMATION
†
• Adaptive−Non−Overlap Gate Drive Circuit
• Output Disable Control Turn Off of Both Phase Pair MOSFETs
Device
NCP5395MNR2G
Package
Shipping
QFN48
2500/Tape & Reel
• This is a Pb−Free Device
(Pb−Free)
Applications
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
• Desktop Processors
This document contains information on a product under development. ON Semiconductor
reserves the right to change or discontinue this product without notice.
©
Semiconductor Components Industries, LLC, 2008
1
Publication Order Number:
July, 2008 − Rev. P5
NCP5395/D