NCP5425
Dual Synchronous
Buck Controller
The NCP5425 is a highly flexible dual buck controller with internal
gate drivers that can be used with two input power supplies and one or
two outputs in multiple configurations. The part contains all the
circuitry required for two independent synchronous dual NFET buck
regulators utilizing a feed forward voltage mode control method. The
NCP5425 can run from a single supply ranging from 4.6 to 12 V and
support a single two phase or dual single phase outputs. When used as
a dual output controller, the second output tracks voltage transients
from the first. Power blanking for low noise applications is supported
as well as independent cycle−by−cycle current limiting. The part is
available in a 20 pin TSSOP package allowing the designer to
minimize PCB area.
http://onsemi.com
20
1
TSSOP−20
DB SUFFIX
CASE 948E
Features
• Operation Over 4.6 to 13.2 V
• Dual Synchronous Buck Design
PIN CONNECTIONS AND
MARKING DIAGRAM
• Configurable as a Single Two Phase Output or Two Single Phase
Outputs
20
1
• Programmable Power Sharing and Budgeting from Two Independent
Supplies
GATEH1
GATEL1
GATEH2
GATEL2
GND
BST
NC
NC
IS+1
IS−1
V
CC
• 0.8 V "1% Reference for Low Voltage Outputs
R
OSC
NCP
5425
ALYW G
G
• 1.5 A Peak Power Drive
MODE
IS−2
IS+2
• Switch Blanking for Noise Sensitive Applications through use of
R
OSC
Pin
V
V
REF2
V
• Programmable Frequency, 150 kHz to 750 kHz Operation
• Programmable Soft−Start
FB1
FB2
COMP1
COMP2
• Cycle−by−Cycle Overcurrent Protection
• Independent Programmable Current Limits
• 100% Duty Cycle for Fast Transient Response
• Internal Slope Compensation
• Out−of−Phase Synchronization between the Controllers
• Input Undervoltage Lockout
• On/Off Enable through use of the COMP Pins
• Power Supply Sequencing
• These are Pb−Free Devices
A
L
Y
= Assembly Location
= Wafer Lot
= Year
W = Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
†
Device
Package
Shipping
75 Units/Tube
75 Units/Tube
NCP5425DB
TSSOP−20*
TSSOP−20*
Applications
NCP5425DBG
NCP5425DBR2
• DDR Memory Power
• Graphics Cards
TSSOP−20* 2500/Tape & Reel
2500/Tape & Reel
NCP5425DBR2G TSSOP−20*
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
*This package is inherently Pb−Free.
©
Semiconductor Components Industries, LLC, 2006
1
Publication Order Number:
July, 2006 − Rev. 9
NCP5425/D