NCP345
Advance Information
Over Voltage Protection IC
The NCP345 over–voltage protection circuit (OVP) protects
sensitive electronic circuitry from over–voltage transients and power
supply faults when used in conjunction with an external P–channel
FET. The device is designed to sense an over–voltage condition and
quickly disconnect the input voltage supply from the load before any
damage can occur. The OVP consists of a precise voltage reference, a
comparator with hysteresis, control logic, and a MOSFET gate driver.
The OVP is designed on a robust BiCMOS process and is intended to
withstand voltage transients up to 30 V.
http://onsemi.com
5
1
The device is optimized for applications that have an external
AC/DC adapter or car accessory charger to power the product and/or
recharge the internal batteries. The nominal over–voltage threshold is
6.85 V so it is suitable for single cell Li–Ion applications as well as 3/4
cell NiCD/NiMH applications.
TSOP–5
SN SUFFIX
CASE 483
PIN CONNECTIONS &
MARKING DIAGRAM
Features
• Over–Voltage Turn–Off Time of less than 1.0 µsec
• Accurate Voltage Threshold of 6.85 V (nominal)
• Under–Voltage Lockout Protection
• CNTRL Input Compatible with 1.8 V Logic Levels
OUT
GND
VCC
1
2
3
5
4
CNTRL
IN
Typical Applications
Y
W
= Year
= Work Week
• Cellular Phones
• Digital Cameras
(Top View)
• Portable Computers and PDAs
• Portable CD and other Consumer Electronics
ORDERING INFORMATION
Device
Package
Shipping
NCP345SNT1
TSOP–5
3000 / 7″ Reel
Schottky
Diode
P–CH
AC/DC Adapter or
Accessory Charger
V
CC
IN
Under–voltage
Lock Out
+
+
-
C1
LOAD
FET
Driver
Logic
OUT
V
ref
NCP345
CNTRL
GND
Microprocessor
port
Note: This device contains 89 active transistors
Figure 1. Simplified Application Diagram
This document contains information on a new product. Specifications and information herein are subject to change without notice.
Semiconductor Components Industries, LLC, 2001
1
Publication Order Number:
March, 2001 – Rev. 1
NCP345/D