NCP1800
Single−Cell Lithium Ion
Battery Charge Controller
The NCP1800 is a constant current, constant voltage (CCCV)
lithium ion battery charge controller. The external sense resistor sets
the full charging current, and the termination current is 10% of the
Full−Charge current (0.1 C). The voltage is regulated at ±1% during
the final charge stage. There is virtually zero drain on the battery when
the input power is removed.
http://onsemi.com
Micro8t
Features
CASE 846A
DM SUFFIX
8
• Pb−Free Package is Available
1
• Integrated Voltage and Programmable Current Regulation
• Integrated Cell Conditioning for Deeply Discharged Cell
• Integrated End of Charge Detection
• Better than 1% Voltage Regulation
• Charger Status Output for LED or Host Processor Interface
• Charge Interrupt Input
PIN CONNECTIONS AND
MARKING DIAGRAM
ISNS
ISEL
1
2
3
4
8
7
6
5
OUT
V
CC
• Safety Shutoff for Removal of Battery
• Adjustable Charge Current Limit
• Input Over and Undervoltage Lockout
• Micro8t Package
COMP/DIS
GND
CFLG
VSNS
X
= A for 41 Device
B for 42 Device
= Assembly Location
= Year
Applications
A
Y
• Cellular Phones, PDAs
• Handheld Equipment
• Battery Operated Portable Devices
W = Work Week
ORDERING INFORMATION
PMOS/Schottky (FETKYt): NTHD4P02FT1 (ChipFETt)
PMOS: NTGS3441T1 (TSOP 6)
Schottky: MBRM130L
†
Device
Package
Micro8
Shipping
NCP1800DM41R2
NCP1800DM42R2
NCP1800DM41R2G
4000 Units/Reel
4000 Units/Reel
4000 Units/Reel
R
SNS
Micro8
V
in
Micro8
(Pb−Free)
OUT
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
V
CC
ISNS
NCP1800
VSNS
Host or LED
CFLG
Host
Processor
COMP/
DIS
ISEL
R
R
COMP
C
ISEL
out
60 k
C
C
in
COMP
GND
R
= 15 W, C
= 560 nF
COMP
COMP
Figure 1. Typical Application
Semiconductor Components Industries, LLC, 2004
1
Publication Order Number:
November, 2004 − Rev. 5
NCP1800/D