NCP1854
2.5 A Fully Integrated Li-Ion
Switching Battery Charger
with Power Path
Management and USB
On-The-Go Support
http://onsemi.com
The NCP1854 is a fully programmable single cell Lithium−ion
switching battery charger optimized for charging from a USB
compliant input supply and AC adaptor power source. The device
integrates a synchronous PWM controller, power MOSFETs, and the
entire charge cycle monitoring including safety features under
software supervision. An optional battery FET can be placed between
the system and the battery in order to isolate and supply the system.
The NCP1854 junction temperature is monitored during charge cycle
MARKING
DIAGRAM
1854
AYWW
G
25 BUMP
FLIP−CHIP
CASE 499BN
1854 = Specific Device Code
2
and both current and voltage can be modified accordingly through I C
A
Y
= Assembly Location
= Year
setting. The charger activity and status are reported through a
dedicated pin to the system. The input pin is protected against
overvoltages.
WW = Work Week
G = Pb−Free Package
The NCP1854 also provides USB OTG support by boosting the
battery voltage as well as providing overvoltage protected power
supply for USB transceiver.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 27 of this data sheet.
Features
• 2.5 A Buck Converter with Integrated Pass Devices
• Input Current Limiting to Comply to USB Standard
• Automatic Charge Current for AC Adaptor Charging
• High Accuracy Voltage and Current Regulation
• Input Overvoltage Protection up to +28 V
• Factory Mode
• 1000 mA Boosted Supply for USB OTG Peripherals
• Reverse Leakage Protection Prevents Battery Discharge
• Protected USB Transceiver Supply Switch
• Dynamic Power Path with Optional Battery FET
• Silicon Temperature Supervision for Optimized Charge Cycle
• Safety Timers
• Flag Output for Charge Status and Interrupts
2
• I C Control Bus up to 3.4 MHz
• Small Footprint 2.2 x 2.55 mm CSP Package
• These Devices are Pb−Free and are RoHS Compliant
Typical Applications
• Smart Phone
• Handheld Devices
• Tablets
• PDAs
© Semiconductor Components Industries, LLC, 2014
1
Publication Order Number:
September, 2014 − Rev. 4
NCP1854/D