NCP1800
Single−Cell Lithium Ion
Battery Charge Controller
The NCP1800 is a constant current, constant voltage (CCCV)
lithium ion battery charge controller. The external sense resistor sets
the full charging current, and the termination current is 10% of the full
charge current (0.1 C). The voltage is regulated at ±1% during the
final charge stage. There is virtually zero drain on the battery when the
input power is removed.
http://onsemi.com
Micro8t
Features
CASE 846A
DM SUFFIX
8
• Integrated Voltage and Programmable Current Regulation
• Integrated Cell Conditioning for Deeply Discharged Cell
• Integrated End of Charge Detection
• Better than 1% Voltage Regulation
• Charger Status Output for LED or Host Processor Interface
• Charge Interrupt Input
• Safety Shutoff for Removal of Battery
• Adjustable Charge Current Limit
• Input Over and Under Voltage Lockout
• Micro8 Package
1
PIN CONNECTIONS AND
MARKING DIAGRAM
ISNS
ISEL
1
2
3
4
8
7
6
5
OUT
V
CC
COMP/DIS
GND
CFLG
VSNS
Applications
X
= A for 41 Device
B for 42 Device
= Assembly Location
= Wafer Lot
• Cellular Phones, PDAs
• Handheld Equipment
• Battery Operated Portable Devices
A
L
Y
= Year
W = Work Week
PMOS/Schottky (FETKYt): NTHD4P02FT1 (ChipFETt)
PMOS: NTGS3441T1 (TSOP 6)
Schottky: MBRM130L
ORDERING INFORMATION
Device
Package
Micro8
Shipping
R
SNS
NCP1800DM41R2
NCP1800DM42R2
4000 Units/Reel
4000 Units/Reel
V
in
Micro8
OUT
V
CC
ISNS
NCP1800
VSNS
Host or LED
CFLG
Host
Processor
COMP/
DIS
ISEL
R
R
COMP
C
ISEL
out
60 k
C
C
in
COMP
GND
R
= 15 W, C
= 560 nF
COMP
COMP
Figure 1. Typical Application
Semiconductor Components Industries, LLC, 2003
1
Publication Order Number:
May, 2003 - Rev. 4
NCP1800/D