NXP Semiconductors
Data Sheet: Technical Data
K22P64M120SF8
Rev. 7, 08/2016
Kinetis K22F 128 KB/256 KB
MK22FN256CAH12R
MK22FN128CAH12R
Flash 64-pin WLCSP
120 MHz ARM® Cortex®-M4-Based Microcontroller with FPU
The Kinetis K22 WLCSP product family members are optimized
for space-constrained, cost-sensitive applications requiring low
power, USB connectivity, and processing efficiency with a
floating point unit. These devices share the comprehensive
enablement and scalability of the Kinetis family. This product
offers:
• Run power consumption down to 153 μA/MHz and static
power consumption down to 2.6 μA with full state retention
and 6 μs wakeup. Lowest static mode down to 120 nA
• USB LS/FS OTG 2.0 w/ embedded 3.3 V, 120 mA LDO
voltage regulator. USB FS device crystal-less functionality.
64 WLCSP (AH)
3.36 x 3.33 x 0.56 Pitch 0.4 mm
Performance
• 120 MHz ARM® Cortex®-M4 core with DSP
Analog modules
• Two 16-bit SAR ADCs (1.2 MS/s in 12-bit mode)
• One 12-bit DAC
instructions delivering 1.25 Dhrystone MIPS per MHz
• Two analog comparators (CMP) with 6- bit DAC
• Accurate internal voltage reference
Memories and memory interfaces
• Up to 256 KB of embedded flash and 48 KB of RAM
• Serial programming interface (EzPort)
• Preprogrammed Kinetis flashloader for one-time, in-
system factory programming
Communication interfaces
• USB LS/FS OTG 2.0 with on-chip transceiver and
USB LDO voltage regulator
• USB full-speed device crystal-less operation
• Two SPI modules
• Three UART modules and one low-power UART
• Two I2C: Support for up to 1 Mbps operation
• I2S module
System peripherals
• Flexible low-power modes, multiple wake up sources
• 16-channel DMA controller
• Independent external and software watchdog monitor
Clocks
Timers
• Two crystal oscillators: 32 kHz (RTC) and 32-40 kHz or
3-32 MHz
• Three internal oscillators: 32kHz, 4MHz, and 48MHz
• Multipurpose clock generator with PLL and FLL
• One 8-ch general-purpose PWM timer
• Two 2-ch general-purpose timers with quadrature
decoder functionality
• Periodic interrupt timers
• 16-bit low-power timer
• Real-time clock with independent power domain
• Programmable delay block
Security and integrity modules
• Hardware CRC module
• 128-bit unique identification (ID) number per chip
• Hardware random-number generator
• Flash access control to protect proprietary software
Operating Characteristics
• Voltage range (including flash writes): 1.71 to 3.6 V
• Temperature range (ambient): -40 to 85°C
Human-machine interface
• Up to 40 general-purpose I/O (GPIO)
NXP reserves the right to change the production detail specifications as may be
required to permit improvements in the design of its products.