Freescale Semiconductor, Inc.
Data Sheet: Technical Data
K22P80M120SF5V2
Rev 5, 03/2015
Kinetis K22F Sub-Family Data
MK22FX512AVLK12
MK22FN1M0AVLK12
Sheet
120 MHz ARM® Cortex®-M4-based Microcontroller with FPU
The K22 product family members are optimized for cost-sensitive
applications requiring low-power, USB connectivity, processing
efficiency with floating point unit. It shares the comprehensive
enablement and scalability of the Kinetis family. This product
offers:
• Up to 1 MB of flash memory with up to 128 KB of SRAM
• Small package with high memory density
80 LQFP
• Run power consumption down to 279 μA/MHz. Static
power consumption down to 5.1 μA with full state retention
and 5 μs wakeup. Lowest Static mode down to 268 nA
• USB LS/FS OTG 2.0 with embedded 3.3 V, 120 mA LDO
voltage regulator
12 x 12 x 1.6 mm Pitch 0.5 mm
Performance
• Up to 120 MHz ARM Cortex-M4-based core with DSP
Communication interfaces
• USB full-/low-speed On-the-Go controller
• USB Device Charger detect
• Controller Area Network (CAN) module
• Three SPI modules
• Three I2C modules
• Six UART modules
instructions delivering 1.25 Dhrystone MIPS per MHz
Memories and memory interfaces
• Up to 1 MB program flash memory and 128 KB RAM
• 4 KB FlexRAM and 128 KB FlexNVM on FlexMemory
devices
• Secure Digital host controller (SDHC)
• I2S module
• FlexBus external bus interface
System peripherals
Timers
• Multiple low-power modes; low leakage wakeup unit
• Memory protection unit with multi-master protection
• 16-channel DMA controller
• Two 8-channel Flex-Timers (PWM/Motor Control)
• Two 2-channel Flex-Timers (PWM/Quad Decoder)
• Periodic interrupt timers and 16-bit low-power timer
• Carrier modulator transmitter
• External watchdog monitor and software watchdog
• Real-time clock
• Programmable delay block
Security and integrity modules
• Hardware CRC module
• 128-bit unique identification (ID) number per chip
Clocks
• 3 to 32 MHz and 32 kHz crystal oscillator
• PLL, FLL, and multiple internal oscillators
Analog modules
• Two 16-bit SAR ADCs
• One 12-bit DAC
Operating Characteristics
• Three analog comparators (CMP)
• Voltage reference
• Voltage range: 1.71 to 3.6 V
• Flash write voltage range: 1.71 to 3.6 V
• Temperature range (ambient): –40 to 105°C
Freescale reserves the right to change the detail specifications as may be required to
permit improvements in the design of its products. © 2013–2014 Freescale
Semiconductor, Inc. All rights reserved.