MBR10xx, MBRF10xx, MBRB10xx
www.vishay.com
Vishay General Semiconductor
Schottky Barrier Rectifier
FEATURES
TO-220AC
ITO-220AC
• Power pack
• Low power loss, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 245 °C (for TO-263AB package)
2
2
1
MBR1045
MBR1060
PIN 1
1
MBRF1045
MBRF1060
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AC and ITO-220AC package)
PIN 1
CASE
• AEC-Q101 qualified available
PIN 2
PIN 2
(for ITO-220AC and D2PAK (TO-263AB) package)
D2PAK (TO-263AB)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
K
TYPICAL APPLICATIONS
2
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, and polarity protection application.
1
MBRB1045
MBRB1060
PIN 1
K
MECHANICAL DATA
Case: TO-220AC, ITO-220AC, D2PAK (TO-263AB)
PIN 2
HEATSINK
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified
(“_X” denotes revision code, e.g. A, B, ...)
click logo to get started
DESIGN SUPPORT TOOLS
Models
Available
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
PRIMARY CHARACTERISTICS
IF(AV)
10 A
Polarity: as marked
VRRM
IFSM
45 V, 60 V
150 A
Mounting Torque: 10 in-lbs maximum
VF
0.57 V, 0.70 V
TJ max.
150 °C
Package
Circuit configuration
TO-220AC, ITO-220AC, D2PAK (TO-263AB)
Single
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VRRM
IF(AV)
IFSM
MBR1045
MBR1060
UNIT
Maximum repetitive peak reverse voltage
45
60
V
A
Maximum average forward rectified current (fig. 1)
Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load
Peak repetitive reverse current at tp = 2.0 µs, 1 kHz
Voltage rate of change (rated VR)
10
150
A
V/μs
°C
IRRM
1.0
0.5
dV/dt
TJ
10 000
-65 to +150
-65 to +175
1500
Operating junction and storage temperature range
TSTG
VAC
Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min
V
Revision: 19-Sep-2018
Document Number: 88669
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000