15 Watts
xppower.com
JBK Series
•
•
•
•
•
•
•
Compact 1.1” x 1.0” Package
Efficiency to 89%
Fully Regulated Single Outputs
Remote On/Off
Input Undervoltage Protection
Fully Isolated 2250 VDC
SMD & Through-hole Versions
Specification
Input
General
Input Voltage Range
• 24 V (18-36 VDC)
Efficiency
• See table
48 V (36-75 VDC)
Isolation
• 2250 VDC min Input to Output
• 400 kHz typical
Input Current
Input Filter
• See table
Switching Frequency
MTBF
• Pi network
• 1,000 kHrs min per MIL-HDBK-217F
Undervoltage Lockout • Turn on >71% nominal input
Turn off <65% nominal input
Environmental
Operating Temperature • -40 °C to +100 °C, derate from 100% load
Output
at +70 °C to 0% load at +100 °C
Output Voltage
• See table
10%
• No minimum load required
Storage Temperature
Cooling
• -40 °C to +125 °C
• Convection-cooled
Output Voltage Trim
Minimum Load
•
Shock
• 30 g, half sine wave 18 ms pulse applied
3 times on each of 6 axes
Line Regulation
Load Regulation
Setpoint Accuracy
Start Up Delay
•
•
•
0.2% max
0.2% max
1.5% max
Vibration
• 5-500 Hz, 3 g, for 10 mins on each
of 3 axes
• 20 ms max
• 3 ms max
EMC
Start Up Rise Time
Ripple & Noise
Emissions
• Meets EN55022 Class B radiated &
conducted with external components
(see application notes)
• 75 mV pk-pk max for 3.3 & 5 V models,
100 mV pk-pk max for 12 & 15 V models
20 MHz BW (see note 3)
ESD Immunity
• EN61000-4-2, level 2 Perf Criteria A
• EN61000-4-3, 3 V/m Perf Criteria A
• EN61000-4-6, 3 V rms Perf Criteria A
Transient Response
• 5% max deviation, recovery to within
1% in 500 µs, 25% step load change
Radiated Immunity
Conducted Immunity
Temperature
Coefficient
•
0.03%/°C max
Overcurrent Protection • 110-140%
Short Circuit Protection • Trip & restart (Hiccup mode), auto recovery
Overvoltage Protection • 3.3 V model 3.63-4.62 V
5.0 V model 5.50-7.00 V
12.0 V model 13.20-16.50 V
15.0 V model 16.50-21.00 V
Remote On/Off
• On >3.5 VDC or open circuit
Off <1.2 VDC or short circuit