JBK5 machinery control transformer
Model:JBK5-152/80-1000L
Characteristics:
JBK5 series machinery control transformer is produced by
high permeability material,Silicon sheets , bottom plate and
silicon sheets are welded in a group by arc,Frame is simple,
Bottom plate increases the reliability to the GND by using
anti-corrosion alloy material ,Crimp terminal using group
structure, increases the Electrical clearance & creepage
distance and cable intensives,Protection class IP20,To prevent
the risk of occasional access to the circuit,the transformer are
used for 50-60Hz AC,Primary voltage is no more than 500V,
secondary rated voltage is no more than 400V,can be as the
general electric control power in mechnical equipment in
industry,the power of Work lighting and signal lights.
Schematic Diagram:
Technical Index:
Technical Index:Sub-plate mounting
Flame resistance :UL94-V0
Insulation class:B
3
1
1
2
3
4
5
6
Operation temperature:-30℃~+40℃
Work frequency:50Hz~60Hz
Dielectric strength:3.75KV 50Hz 1min
2
4
Single output
Double output
Connector Illustration:
Technical Parameters table:
V
%
Primary voltage
Primary voltage range
Voltage regulation
Power
0-500
±10
22.5
19.3
7.5
%
≤10
VA
℃
W
1000
Temperature rising
No load loss
20
11
JBK5 special Crimp terminal for transformer,Spacing7.5,Current30A
Kg
weight
Dimension(in mm):
127
Crimp terminal
GND terminal
152.5
130
Front View
Side View
Bottom fixed diagram
www.yhdc.com
Email:yhdc@yhdc.com