Switching Charger for 1-Cell and 2-Cell Li-ion Batteries
ISL9220, ISL9220A
Features
The ISL9220, ISL9220A is a cost-effective and versatile battery
charger for 1-cell and 2-cell Li-ion and Li-Polymer based portable
applications.
• Highly Integrated Battery Charger IC
• Charges 1- and 2-Cell Li-ion or Li-Polymer Batteries
• Up to 2A Charge Current
The device features synchronous PWM technology, maximizing
power efficiency, thus minimizing charge time and heat. The
1.2MHz switching frequency allows use of small external
inductors and capacitors.
• Synchronous Buck Topology with Integrated Power FETs
• 1.2MHz Switching Frequency
• 0.5% Charge Voltage Accuracy
A simple charge current programming method is provided.
External resistors program the fast charge and end-of-charge
currents.
• Programmable Input Current Limit with One External Resistor
• Thermistor Interface for Battery Detection and Temperature
Qualified Charging
The two status outputs can be used to drive LEDs, or can be
connected to host processor.
• Two Status Outputs
A programmable charge timer provides the ability to detect
defective batteries, and provides a secondary method of
detecting charge termination.
• Programmable Charge Safety Timer
• Short-Circuit and Thermal Protection
• Small 4mmx4mm TQFN Package
• -40°C to +85°C Operating Temperature Range
A thermistor interface is provided for battery presence detection,
and for temperature qualified charging conditions.
Additional features include preconditioning of an over-discharged
battery, automatic recharge, and thermally enhanced QFN
package.
Related Literature
• TB363 “Guidelines for Handling and Processing Moisture
Sensitive Surface Mount Devices (SMDs)”
Applications
• PDAs and Smart Phones
• MP3 and Portable Media Players
• Handheld GPS Devices
• TB379 “Thermal Characterization of Packaged Semiconductor
Devices”
• TB389 “PCB Land Pattern Design and Surface Mount
Guidelines for QFN Packages”
• Digital Still Cameras
• AN1589, “ISL9220IRTZEVAL1Z (1-cell), ISL9220AIRTZEVAL1Z
(2-cell) Evaluation Board”
• Industrial Handheld Scanners
Pin Configuration
ISL9220, ISL9220A
(20 LD TQFN)
TOP VIEW
STAT2
EN
PGND
SW
1
2
3
4
5
15
14
13
12
11
AGND
ISET1
ISET2
SW
PAD
(AGND)
VHI
VIN
February 16, 2012
FN6936.3
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas Inc. 2010-2012. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1