ISL9222A
®
Data Sheet
July 28, 2008
FN6704.0
High Input Voltage Charger
Features
The ISL9222A is a cost-effective, fully integrated high input
voltage single-cell Li-ion battery charger. The charger uses a
CC/CV charge profile required by Li-ion batteries. The
charger accepts an input voltage up to 28V but is disabled
when the input voltage exceeds the OVP threshold, typically
7.2V, to prevent excessive power dissipation. The 28V rating
eliminates the overvoltage protection circuit required in a low
input voltage charger.
• Complete Charger for Single-Cell Li-ion/Polymer Batteries
• Integrated Pass Element and Current Sensor
• No External Blocking Diode Required
• Low Component Count and Cost
• 1% Voltage Accuracy
• Programmable Charge Current
The charge current is user programmable with an external
resistor. When the battery voltage is lower than typically
2.55V, the charger preconditions the battery with typically
20% of the programmed charge current. An internal thermal
foldback function protects the charger from any thermal
failure.
• Charge Current Thermal Foldback for Thermal
Protection
• Trickle Charge for Fully Discharged Batteries
• 28V Maximum Voltage for the Power Input
• Power Presence Indication
AN indication pin PPR allows simple interface to a
microprocessor or LED. When no adapter is attached or
when disabled, the charger draws less than 1µA leakage
current from the battery.
• Less Than 1µA Leakage Current off the Battery When No
Input Power Attached or Charger Disabled
• Ambient Temperature Range: -40°C to +85°C
• 8 Ld 2x3 TDFN Package
Ordering Information
• Auxiliary OR-gate For System Booting Logic
• Pb-Free (RoHS Compliant)
PART
NUMBER
(Note)
TEMP.
RANGE
(°C)
PART
MARKING
PACKAGE
(Pb-Free)
PKG.
DWG. #
Applications
• Mobile Phones
• Blue-Tooth Devices
• PDAs
ISL9222AIRTZ-T 22A
-40 to +85 8 Ld 2x3 TDFN L8.2x3A
Tape and Reel
*Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations). Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
• MP3 Players
• Stand-Alone Chargers
• Other Handheld Devices
Pinout
ISL9222A
(8 LD TDFN)
TOP VIEW
VIN
BAT
1
2
3
4
8
7
6
5
PPR
JIGON
EN
IREF
JIGIN
GND
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.