ISL9228
®
Data Sheet
February 13, 2009
FN6687.0
Dual Input Li-ion/Li-Polymer Battery
Features
Charger With Battery Removal Detection
• Complete Charger for Single-Cell Li-ion/Polymer Batteries
• Dual Input Power Sources for Cradle and USB
• Battery Removal Detection
The ISL9228 is a fully integrated low-cost single-cell Li-ion or
Li-polymer battery charger. The charger accepts two power
inputs, normally one from a USB (Universal Serial Bus) port
and the other from a desktop cradle. The ISL9228 is an ideal
charger for smart handheld devices that need to
• Integrated Pass Elements
• Fixed 380mA USB Charge Current
communicate with a personal computer via USB.
• Programmable Cradle Charge Current
The ISL9228 features 28V maximum voltages for both the
cradle and the USB inputs. Due to the 28V rated inputs, low-
cost, large output tolerance adapters can be used safely.
The 28V rating eliminates the over voltage protection circuit
required in a low input voltage charger.
• Charge Current Thermaguard™ for Thermal
Protection
• 28V Maximum Voltages for Cradle and USB Inputs
• 1% Constant Voltage Accuracy
When both inputs are powered, the cradle input is used to
charge the battery. The charge current is programmable for
the cradle input with a small resistor. The end-of-charge
current is also programmable by another external resistor.
The charger incorporates Thermaguard™ which protects the
IC against over temperature. If the die temperature rises
above a typical value of +125°C, a thermal foldback function
reduces the charge current automatically to prevent further
temperature rise. The charger has two indication pins. The
PPR (power present) pin outputs an open-drain logic LOW
when either the cradle or the USB input power is attached.
The CHG (charge) pin is also an open-drain output that
indicates a logic LOW when the charge current is above a
minimum current level. When the charge current is below the
preset minimum current, the CHG pin will turn to logic high to
indicate the end-of-charge condition.
• Adapter Presence and Charge Indications
• Less than 0.5µA Leakage Current off the Battery when No
Input Power Attached
• Programmable End-of-Charge Current
• Ambient Temperature Range: -40°C to +85°C
• No External Blocking Diode Required
• Pb-Free (RoHS Compliant)
Applications
• Smart Handheld Devices
• Cell Phones, PDAs, MP3 Players
• Digital Still Cameras
• Handheld Test Equipment
Ordering Information
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
PART
NUMBER
(Note)
TEMP.
RANGE
(°C)
PART
MARKING
PACKAGE
(Pb-free)
PKG.
DWG. #
ISL9228IRZ
9228
-40 to +85 10 Ld 3x3 DFN L10.3x3C
• Technical Brief TB389 “PCB Land Pattern Design and
Surface Mount Guidelines for QFN Packages”
ISL9228IRZ-T 9228
-40 to +85 10 Ld 3x3 DFN L10.3x3C
Tape and Reel
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Pinout
ISL9228
(10 LD DFN)
TOP VIEW
CRDL
USB
PPR
CHG
EN
BAT
ICDL
GND
VF
1
2
3
4
5
10
9
8
7
IMIN
6
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009. All Rights Reserved. Thermaguard is a trademark of Intersil Americas Inc.
All other trademarks mentioned are the property of their respective owners.
1