DATASHEET
ISL9241
R16DO0010EU0500
Rev.5.0
Buck-Boost Configurable Battery Charger with SMBus Interface and USB
Power Delivery
Aug 12, 2021
The ISL9241 is a digitally configurable buck-boost
battery charger that can support both Narrow Voltage
Features
• Buck-boost NVDC or hybrid power (turbo boost)
charger for 2-, 3-, or 4-cell Li-ion batteries using all
NFET transistors
Direct Charging (NVDC) and Hybrid Power Buck Boost
(HPBB/Bypass) charging and switch between the modes
using firmware control. Bypass mode is also supported
using the firmware of the controller, which allows the
adapter to provide power directly to the system. The
ISL9241 provides charging functionality, system bus
regulation, and protection features using only NFETs for
tablet, Ultrabook, and notebook platforms. The advanced
Renesas R3™ technology provides a high, light-load
efficient Charging mode. The ISL9241 takes input power
from a wide range of DC power sources (such as
• Input voltage range: 3.9V to 23.4V (no dead zone)
• System/battery output voltage: 3.9V to 18.304V
• Bypass mode supported to connect system to adapter
• Autonomous charging option (automatic end of
charging)
• Adapter current and battery current monitor
(AMON/BMON)
conventional AC/DC charger adapters, USB Type-C
Power ports, and travel adapters) and safely charges
battery packs with up to 4-series cell Li-ion batteries.
• PROCHOT# open-drain output, IMVP compliant
• System power monitor PSYS output, IMVP8/9
compliant
The system power can be provided from the adapter,
battery, or a combination of both. The reconfigurable
internal registers of the charger allow the use of a smaller
inductor for the HPBB mode to achieve higher
• Internal 8-bit ADC for monitoring key parameters
• USB-C PD Fast Role Swap support and PPS support
efficiencies across multiple power levels. The ISL9241
can operate with only a battery, only an adapter, or both
connected. For Intel IMVP compliant systems, the
ISL9241 includes System Power monitor (PSYS)
functionality, which provides an analog signal
• Independent compensation pins for forward and
reverse operation (OTG) modes
• Supports supplemental power (Intel V
protection)
active
MIN
• Battery Ship mode: IC ultra-low power state
• Supports JEITA compliance using an NTC
• 4x4 32 Ld TQFN package
representing total platform power. The PSYS output
connects to a wide range of IMVP core regulators to
provide an IMVP compliant power domain function. The
ISL9241 supports reverse buck, boost, or buck-boost
operation to the adapter port (OTG mode) from 2- to
4-cell batteries. This allows configurations to support
USB-C Power Delivery (PD) output for Programmable
Power Supply (PPS) ports. The ISL9241 serial
Applications
• 2- to 4-cell tablets, notebooks, power banks, and any
USB-C interface portable device requiring batteries
2
communication uses SMBus/I C, which allows
programming of many key parameters to deliver a
customized solution.
BYPSG
VSYS
V
IN
C
OUT
C
IN
NGATE
Q
1
Q
4
BGATE
Q
2
Q
3
C
BAT
Figure 1. Typical Application
R16DO0010EU0500 Rev.5.0
Aug 12, 2021
Page 1 of 1
© 2018 Renesas Electronics