HSP45116
®
Data Sheet
J uly 2004
FN2485.8
Vector Input of the CMAC, which multiplies the data by the
rotating vector from the Sine/Cosine Section. The resulting
complex output is the down converted signal.
Numerically Controlled
Os cillator/Modulator
The Intersil HSP45116 combines a high performance
quadrature Numerically Controlled Oscillator (NCO) and a
high speed 16-bit Complex Multiplier/Accumulator (CMAC)
on a single IC. This combination of functions allows a
complex vector to be multiplied by the internally generated
(cos, sin) vector for quadrature modulation and
demodulation. As shown in the Block Diagram, the
HSP45116 is divided into three main sections. The
Phase/Frequency Control Section (PFCS) and the
Sine/Cosine Section together form a complex NCO. The
CMAC multiplies the output of the Sine/ Cosine Section with
an external complex vector.
Features
• NCO and CMAC on One Chip
• 15MHz, 25.6MHz, 33MHz Versions
• 32-Bit Frequency Control
• 16-Bit Phase Modulation
• 16-Bit CMAC
• 0.008Hz Tuning Resolution at 33MHz
• Spurious Frequency Components < -90dBc
• Fully Static CMOS
The inputs to the Phase/Frequency Control Section consist
of a microprocessor interface and individual control lines.
The phase resolution of the PFCS is 32 bits, which results in
frequency resolution better than 0.008Hz at 33MHz. The
output of the PFCS is the argument of the sine and cosine.
The spurious free dynamic range of the complex sinusoid is
greater than 90dBc.
Applications
• Frequency Synthesis
• Modulation - AM, FM, PSK, FSK, QAM
• Demodulation, PLL
• Phase Shifter
The output vector from the Sine/Cosine Section is one of the
inputs to the Complex Multiplier/Accumulator. The CMAC
multiplies this (cos, sin) vector by an external complex vector
and can accumulate the result. The resulting complex vectors
are available through two 20-bit output ports which maintain
the 90dB spectral purity. This result can be accumulated
internally to implement an accumulate and dump filter.
• Polar to Cartesian Conversions
Ordering Information
TEMP.
RANGE (°C) PACKAGE
PKG.
DWG. #
PART NUMBER
HSP45116VC-25
HSP45116AVC-52
0 to 70
0 to 70
160 Ld MQFP Q160.28x28
160 Ld MQFP Q160.28x28
A quadrature down converter can be implemented by
loading a center frequency into the Phase/Frequency
Control Section. The signal to be down converted is the
† This part has its own data sheet under HSP45116A,
Document # FN4156.
Block Diagram
VECTOR INPUT
R
I
SINE/
COSINE
ARGUMENT
MICROPROCESSOR
PHASE/
SIN
INTERFACE
FREQUENCY
SINE/
COSINE
SECTION
CMAC
CONTROL
COS
INDIVIDUAL
SECTION
CONTROL SIGNALS
R
I
VECTOR OUTPUT
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 1999, 2004. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.