HI-516
®
Data Sheet
April 1, 2005
FN3146.4
16-Channel/Differential 8-Channel, CMOS
High Speed Analog Multiplexer
Features
• Access Time (Typical) . . . . . . . . . . . . . . . . . . . . . . . 130ns
• Settling Time . . . . . . . . . . . . . . . . . . . . . . . . 250ns (0.1%)
• Low Leakage (Typical)
The Hl-516 is a monolithic, dielectrically isolated, high-
speed, high-performance CMOS analog multiplexer. It
offers unique built-in channel selection decoding plus an
inhibit input for disabling all channels. The dual function of
- I
- I
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10pA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30pA
S(OFF)
D(OFF)
address input A enables the Hl-516 to be user
3
programmed either as a single ended 16-Channel
multiplexer by connecting ‘out A’ to ‘out B’ and using A as
a digital address input, or as an 8-Channel differential
• Low Capacitance (Max)
3
- C
- C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10pF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25pF
S(OFF)
D(OFF)
multiplexer by connecting A to the V- supply. The
3
substrate leakages and parasitic capacitances are reduced
substantially by using the Intersil Dielectric Isolation
process to achieve optimum performance in both high and
• Off Isolation at 500kHz . . . . . . . . . . . . . . . . . . 55dB (Min)
• Low Charge Injection Error . . . . . . . . . . . . . . . . . . . 20mV
• Single Ended to Differential Selectable (SDS)
• Logic Level Selectable (LLS)
low level signal applications. The low output leakage
o
current (l
< 100pA at 25 C) and fast settling
D(OFF)
(t
= 800ns to 0.01%) characteristics of the device
SETTLE
• Pb-Free Available (RoHS Compliant)
make it an ideal choice for high speed data acquisition
systems, precision instrumentation, and industrial process
control.
Applications
• Data Acquisition Systems
• Precision Instrumentation
• Industrial Control
For MIL-STD-883 compliant parts, request the Hl-516/883
data sheet.
Ordering Information
TEMP.
PKG.
DWG. #
Pinout
o
PART NUMBER RANGE ( C)
PACKAGE
28 Ld PDIP
HI-516 (PDIP)
TOP VIEW
HI3-0516-5
0 to 75
0 to 75
E28.6
E28.6
HI3-0516-5Z
(See Note)
28 Ld PDIP*
(Pb-free)
V+
OUT B
1
2
3
4
5
6
7
8
9
28 OUT A
27 V-
*Pb-free PDIPs can be used for through hole wave solder
processing only. They are not intended for use in Reflow solder
processing applications.
26 IN 8/8A
25 IN 7/7A
24 IN 6/6A
23 IN 5/5A
22 IN 4/4A
21 IN 3/3A
NC
IN 16/8B
IN 15/7B
IN 14/6B
IN 13/5B
IN 12/4B
IN 11/3B
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
20
IN 2/2A
IN 10/2B 10
IN 9/1B 11
GND 12
19 IN 1/1A
18 ENABLE
17 A
16 A
15 A
0
1
2
V
/LLS 13
DD
A /SDS 14
3
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2000, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.