HI-518
®
Data Sheet
January 23, 2006
FN3147.4
8-Channel/Differential 4-Channel, CMOS
High Speed Analog Multiplexer
Features
• Access Time (Typical) . . . . . . . . . . . . . . . . . . . . . . 130ns
• Settling Time . . . . . . . . . . . . . . . . . . . . . . . . 250ns (0.1%)
• Low Leakage (Typical)
The Hl-518 is a monolithic, dielectrically isolated, high
speed, high performance CMOS analog multiplexer. It offers
unique built-in channel selection decoding plus an inhibit
input for disabling all channels. The dual function of address
- I
- I
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10pA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15pA
S(OFF)
D(OFF)
input A enables the Hl-518 to be user programmed either
2
as a single ended 8-Channel multiplexer by connecting ‘Out
• Low Capacitance (Max)
A’ to ‘Out B’ and using A as a digital address input, or as a
2
- C
- C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5pF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10pF
S(OFF)
D(OFF)
4-Channel differential multiplexer by connecting A to the V-
2
supply. The substrate leakages and parasitic capacitances
are reduced substantially by using the Intersil Dielectric
Isolation process to achieve optimum performance in both
• Off Isolation at 500kHz . . . . . . . . . . . . . . . . . . 45dB (Min)
• Low Charge Injection Error . . . . . . . . . . . . . . . . . . . 25mV
• Single Ended to Differential Selectable (SDS)
• Logic Level Selectable (LLS)
high and low level signal applications. The low output
o
leakage current (l
< 100pA at 25 C) and fast settling
D(OFF)
(t
= 800ns to 0.01%) characteristics of the device
SETTLE
make it an ideal choice for high speed data acquisition
systems, precision instrumentation, and industrial process
control.
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
Ordering Information
• Data Acquisition Systems
• Precision Instrumentation
• Industrial Control
PART
PART
TEMP.
PKG.
o
NUMBER MARKING RANGE ( C)
PACKAGE DWG. #
HI3-0518-5 HI3-518-5
0 to 75
0 to 75
18 Ld PDIP
E18.3
E18.3
Pinout
HI3-0518-5Z HI3-518-5Z
(See Note)
18 Ld PDIP*
(Pb-free)
HI-518 (CERDIP, PDIP)
TOP VIEW
HI1-0518-8
-55 to 125 18 Ld CERDIP F18.3
*Pb-free PDIPs can be used for through hole wave solder
processing only. They are not intended for use in Reflow solder
processing applications.
1
2
3
4
5
6
7
8
9
18
17
V+
OUT B
IN8/4B
IN7/3B
IN6/2B
IN5/1B
GND
OUT A
V-
16 IN4/4A
15 IN3/3A
14 IN2/2A
13 IN1/1A
12 ENABLE
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
V
/LLS
11
10
A
A
DD
0
1
A /SDS
2
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003, 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.