ETA3555
5A, 2.2MHz I2C Controlled Output Synchronous Step-Down Converter
DESCRIPTION
FEATURES
I2C Dynamic Output Control
The ETA3555 is a high-efficiency, DC-to-DC step-down
switching regulator, capable of delivering up to 5A of
pulse load. It integrates an I2C interface that dynamically
scales the output voltages on demand. The DCDC control
block belongs to a new breed of high frequency
synchronous Step-Down converter that combines the
advantages of voltage mode control and Constant-On-
Time control. Its adaptive Constant-On-Time control
dynamically changes switch on time to achieve a constant
switching frequency. It does not have the minimum on-
time constrain normally a fixed-frequency current mode
Step-down requires, allowing it to go down to very low
duty ratio without affecting loop stability. The voltage
mode nature also provides a more superior load
transient response and a seamless transition from PFM
to PWM modes. Cycle-by-cycle current limit provides
output short-circuit protection and an input OVP function
guards ETA3555 against possible input voltage surge.
ETA3555 is housed in a 2mm x 1.6mm CSP-20 Package.
Synchronous High Efficiency up to 95%
Fast load transient response
Capable of Delivering 5A
Input OVP at 6V
No External Schottky Diode Needed
Thermal shutdown and UVLO
CSP-20 (4x5) package
APPLICATIONS
ARM based CPUs
Smart Phone
Tablet, MID
Smart Set-Top Box, OTT
ORDERING INFORMATION
PART
ETA3555CSU
PACKAGE PIN
CSP-20 (4x5)
TOP MARK
3555
YWWL ( Date Code)
TYPICAL APPLICATION
0.33uH
VIN 2.5V to 5.5V
VOUT
SW
FB
AVIN/PVIN
EN
ETA3555
20uF 10uF
VSEL
SDA
SCL
22uF x 2
I2C
AGND/PGND
Typical Application Circuit
www.etasolution.com
1
Powering Minds of the Smart