ETA4040
30V Input Standoff, 1A Fully Integrated Linear Charger for
1 Cell Li-ion Battery
DESCRIPTION
FEATURES
ETA4040 is a single cell, fully integrated constant current
(CC)/constant voltage (CV) Li-ion battery charger. Its
compact package with minimum external components
requirement makes the ETA4040 ideal for portable
applications. No external sense resistor or blocking diode
30V Input Standoff Voltage
4.2V Charge Termination Voltage
Charge Current Programmable, Up to 1A
Pin Selectable USB 100mA or 500mA Maximum
Input Current Limit
is necessary for the ETA4040. Build-in thermal feedback Programmable Termination Current and Pre-
mechanism regulates the charge current to control the die
temperature during high power operation or at elevated
ambient temperature. The ETA4040 has the function of
pre-charge, which can charge the deeply discharged
batteries by trickle. The fast charge current can be
programmed by an external resistor. CV regulation mode
is automatically enabled once the battery’s charging curve
reaches the constant voltage portion. The pre-charge
current and the termination current threshold are
programmed by an external resistor as well. The ETA4040
keeps monitoring the battery voltage and enables a new
charge cycle once the voltage drops by 100mV below the
CV value.
charge Current Threshold
Operation over JEITA Range via Battery NTC
Fixed 10 hours Safety Timer
Soft-start Limits in-rush Current
DFN2X2-10 Package
APPLICATIONS
E-cigarette
Toys
Wearable Devices
Li-ion Battery Powered Devices
ETA4040 is in a DFN2X2-10 package.
TYPICAL APPLICATION
High: Input current limit =500mA
Float: Input current limit=100mA
Low: Input current limit=ISET
1
5
IN
VIN
7
ISET2
1.5K
nPG ETA4040
1.5K
10
9
BAT
TS
System Load
8
2
4
nCHG
4.7uF
ISET
2.2uF
+
PRETERM
Li
Battery
RISET
GND
3
RPRETERM
PART No.
PACKAGE TOP MARK Pcs/Reel
BEYW
ORDERING INFORMATION
ETA4040D2K
DFN2X2-10
3000
www.etasolution.com
1
Empower, Transcend, Achieve!