ETA4662
I2C Communication, 500mA Single Cell Li-Ion Battery Charger with Power
Path Management,1mA Termination and <1uA Battery Leakage
DESCRIPTION
FEATURES
The ETA4662 is a single cell battery charger with power
path management function for Li-Ion and Li-Polymer battery.
It features pre-charging, fast charging (CC) and constant
voltage (CV) charging, end-of charging termination, and
auto-recharge, and built-in safe-timer preventing from being
over-charged or host running out of control.
Fully Autonomous Charger for Single Cell Li-Ion and
Li-Polymer Battery
21V Maximum Input Voltage Rating with Over-
Voltage Protection
I2C Interface for Setting Charging Parameters and
Status Reporting
The power path management function features a low
dropout regulator from the input to the system and a low
RDSON switch from battery to the system, so it separates the
charging current from the system load. This function
prioritizes the battery and the system, ensuring the
continuous power supply to the system.
Fully Integrated Power Switch and No External
Blocking Diode Required
Battery Temperature Monitor and Programmable
Timer
Battery or PCB Over-Temperature Protection
System Reset Function
Parameters and functions are programmed or selected
through an I2C compatible serial interface, such as input
current limit, charging current, battery regulation voltage,
safety timer, battery UVLO. It also features a safe watchdog
protection.
Battery Disconnection Function
Thermal Limiting Regulation on Chip
FCQFN-9L 1.75x1.75mm
APPLICATIONS
Wearable Devices
The ETA4662 is available in FCQFN-9L package.
Smart Watches
IoT Gadgets
Smart Handheld Devices
TYPICAL APPLICATION
IN
A1
SYS A2
To System
USB Port
1uF
4.7uF
2.2uF
BAT
A3
nINT
B2
C1
Li-ion
battery
pack
.
ETA4662
MCU
SDA
SCL
C2
C3
NTC
VDD
B1
B3
RTS
GND
100nF
www.etasolution.com
1
Empower, Transcend, Achieve!
ETA4662_REV1.8