ETA4016
16V/120mA, 1mA Termination Current Linear Charger
DESCRIPTION
FEATURES
ETA4016 is a single cell, fully integrated constant current
(CC)/constant voltage (CV) Li-ion battery charger. Its
compact package with minimum external components
requirement makes the ETA4016 ideal for portable
applications. No external sense resistor or blocking
diode is necessary for the ETA4016. Build-in thermal
feedback mechanism regulates the charge current to
control the die temperature during high power operation
or at elevated ambient temperature. The ETA4016 has
a pre-charge function for trickle charging deeply
discharged batteries. The fast charge current can be
programmed by an external resistor. CV regulation
mode is automatically enabled once the battery’s
charging curve reaches the constant voltage portion.
The output current then decays and is finally terminated
once the charge current drops to 1/10th of the
programmed value. The ETA4016 keeps monitoring the
battery voltage and enables a new charge cycle once
the voltage drops by 120mV below the CV value.
16V input standoff voltage
4.2V charge termination voltage
1mA termination current
2.9V trickle charge threshold
Charge current programmable, up to 120mA
250nA BAT current when no charging
Soft-start limits in-rush current
DFN2x2-8
APPLICATIONS
E-cigarette
Toys
Bluetooth applications
Li-ion battery powered devices
ETA4016 is in a DFN2x2-8 package.
TYPICAL APPLICATION
VIN
VIN
BAT
NTC
VBAT/ VSYS
1K
1K
1uF
4.7uF
Li+
Battery
STAT
ETA4016
STDBY
EN
RISET
ISET
EN
GND
*
STDBY , NTC and EN pins are not available on SOT23-6 package
PART No.
PACKAGE
TOP MARK
Pcs/Reel
ORDERING INFORMATION
EG|YW
ETA4016D2I
DFN2x2-8
3000
www.etasolution.com
1
Powering Minds of the Smart