ETA355E
5A, I2C Controlled Output Synchronous Step-Down Converter
DESCRIPTION
FEATURES
I2C Dynamic Output Control
The ETA355E is a high-efficiency, DC-to-DC step-down
switching regulator, capable of delivering 5A load, up to
6.5A of pulse load. It integrates an I2C interface that
dynamically scales the output voltages on demand. The
DCDC control block belongs to a new breed of high
frequency synchronous Step-Down converter that
combines the advantages of voltage mode control and
Constant-On-Time control. Its adaptive Constant-On-
Synchronous High Efficiency up to 95%
Fast load transient response
Capable of Delivering 5A
Pulse Current capability 6.5A
Input OVP at 6.2V
No External Schottky Diode Needed
Thermal shutdown and UVLO
Time control dynamically changes switch on time to CSP-20 (4x5) package
achieve a constant switching frequency. It does not have
the minimum on-time constrain normally a fixed-
frequency current mode Step-down requires, allowing it
APPLICATIONS
ARM based CPUs
Smart Phone
to go down to very low duty ratio without affecting loop
stability. The voltage mode nature also provides a more
superior load transient response and a seamless
transition from PFM to PWM modes. Cycle-by-cycle
current limit provides output short-circuit protection and
an input OVP function guards ETA355E against possible
input voltage surge. ETA355E is housed in a 2mm x
1.6mm CSP-20 Package.
Tablet, MID
Smart Set-Top Box, OTT
TYPICAL APPLICATION
0.33uH
V 2.6V to 5.5V
IN
VOUT
AVIN/PVIN
EN
SW
FB
ETA355E
VSEL
SDA
22uF x2
10uF
10nF
I2C
SCL
AGND/PGND
Typical Application Circuit
PART No.
PACKAGE
TOP MARK
Pcs/Reel
ORDERING INFORMATION
355E
ETA355ECSU
CSP-20 (4x5)
3000
YWWL(Date Code)
www.etasolution.com
1
Empower Thinkers