DRV8814
www.ti.com
SLVSAB9C –MAY 2010–REVISED MARCH 2011
DC MOTOR DRIVER IC
Check for Samples: DRV8814
1
FEATURES
•
•
8-V to 45-V Operating Supply Voltage Range
Thermally Enhanced Surface Mount Package
2
•
Dual H-Bridge Current-Control Motor Driver
APPLICATIONS
–
–
–
Drives Two DC Motors
Brake Mode
•
•
•
•
•
•
Printers
Scanners
Office Automation Machines
Gaming Machines
Factory Automation
Robotics
Two-Bit Winding Current Control Allows Up
to 4 Current Levels
–
Low MOSFET On-Resistance
•
•
•
2.5-A Maximum Drive Current at 24 V, 25°C
Built-In 3.3-V Reference Output
Industry Standard Parallel Digital Control
Interface
DESCRIPTION
The DRV8814 provides an integrated motor driver solution for printers, scanners, and other automated
equipment applications. The device has two H-bridge drivers, and is intended to drive DC motors. The output
driver block for each consists of N-channel power MOSFET’s configured as H-bridges to drive the motor
windings. The DRV8814 can supply up to 2.5-A peak or 1.75-A RMS output current (with proper heatsinking at
24 V and 25°C) per H-bridge.
A simple parallel digital control interface is compatible with industry-standard devices. Decay mode is
programmable to allow braking or coasting of the motor when disabled.
Internal shutdown functions are provided for over current protection, short circuit protection, under voltage
lockout and overtemperature.
TheDRV8814 is available in a 28-pin HTSSOP package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).
ORDERING INFORMATION(1)
ORDERABLE PART
NUMBER
TOP-SIDE
MARKING
TA
PACKAGE(2)
–40°C to 85°C
PowerPAD™ (HTSSOP) - PWP
Reel of 2000
DRV8814PWPR
8814
(1) For the most current packaging and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2011, Texas Instruments Incorporated