DRV8823-Q1
www.ti.com
SLVSBH2A –JUNE 2012–REVISED JULY 2012
4-BRIDGE SERIAL INTERFACE MOTOR DRIVER
Check for Samples: DRV8823-Q1
1
FEATURES
•
•
•
•
•
8-V to 32-V Operating Supply Voltage Range
Internal Charge Pump for Gate Drive
Built-in 3.3-V Reference
2
•
•
Qualified for Automotive Applications
AEC-Q100 Qualified with the Following
Results:
Serial Digital Control Interface
–
Device Temperature Grade 1: –40°C to
125°C Ambient Operating Temperature
Range
Fully Protected Against Undervoltage,
Overtemperature, and Overcurrent
•
Thermally Enhanced Surface Mount Package
–
–
Device HBM ESD Classification Level H2
Device CDM ESD Classification Level C3B
APPLICATIONS
•
PWM Motor Driver with Four H-Bridges
•
Automotive
–
Drives Two Stepper Motors, One Stepper
and Two DC Motors, or Four DC Motors
–
–
–
–
Up to 1.5-A Current Per Winding
Low On-Resistance
Programmable Maximum Winding Current
Three-Bit Winding Current Control Allows
up to Eight Current Levels
–
Selectable Slow or Mixed Decay Modes
DESCRIPTION
The DRV8823-Q1 device provides an integrated motor driver solution for printers and other office automation
equipment applications.
The motor driver circuit includes four H-bridge drivers. Each of the motor driver blocks employ N-channel power
MOSFETs configured as an H-bridge to drive the motor windings.
A simple serial interface allows control of all functions of the motor driver with only a few digital signals. A low-
power sleep function is also provided.
The motor drivers provide PWM current control capability. The current is programmable, based on an externally
supplied reference voltage and an external current sense resistor. In addition, eight current levels (set through
the serial interface) allow microstepping with bipolar stepper motors.
Internal shutdown functions are provided for overcurrent protection, short circuit protection, undervoltage lockout
and overtemperature.
The DRV8823-Q1 is packaged in a 48 pin HTSSOP package (Eco-friendly: RoHS and no Sb/Br).
ORDERING INFORMATION(1)
TA
PACKAGE(2)
ORDERABLE PART NUMBER
TOP-SIDE MARKING
–40°C to 125°C
PowerPAD™ (HTSSOP) - DCA
Reel of 2000
DRV8823QDCARQ1
DRV8823Q
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated