DRV8816
www.ti.com
SLRS063 –SEPTEMBER 2013
DMOS DUAL ½-H-BRIDGE MOTOR DRIVERS
Check for Samples: DRV8816
1
FEATURES
DESCRIPTION
The DRV8816 provides a versatile power driver
solution with two independent ½-H bridge drivers.
The device can drive one brushed DC motor or one
winding of a stepper motor, as well as other devices
like solenoids. A simple INx/ENx interface allows
easy interfacing to controller circuits.
•
•
•
•
•
•
•
•
Low ON-Resistance (0.83-Ω) Outputs
Individual ½-H bridge control
Low-Power Sleep Mode
100% PWM Supported
8.0 - 38 V Operating Supply Voltage Range
Thermally Enhanced Surface Mount Package
Configurable Overcurrent Limit
Protection Features
The output stages use N-channel power MOSFET’s
configured as ½-H-bridges. The DRV8816 is capable
of peak output currents up to ±2.8 A and operating
voltages up to 38 V. An internal charge pump
generates needed gate drive voltages.
–
–
–
–
–
–
–
–
VBB Undervoltage Lockout (UVLO)
Charge Pump Undervoltage (CPUV)
Overcurrent Protection (OCP)
A low-power sleep mode is provided which shuts
down internal circuitry to achieve very low quiescent
current draw. This sleep mode can be set using a
dedicated nSLEEP pin.
Short-to-Supply Protection (STS)
Short-to-Ground Protection (STG)
Overtemperature Warning (OTW)
Overtemperature Shutdown (OTS)
Fault Condition Indication Pin (nFAULT)
Internal protection functions are provided for under
voltage lockout, charge pump fault, overcurrent
protection, short-to-supply protection, short-to-ground
protection,
overtemperature
warning,
and
overtemperature shutdown. Fault conditions are
indicated via an nFAULT pin
APPLICATIONS
The DRV8816 is packaged in a 16 pin HTSSOP
package with PowerPAD™ (Eco-friendly: RoHS & no
Sb/Br)
•
•
Printers
Industrial Automation
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated