CY2545/CY2547
Quad-PLL Programmable Spread Spectrum
Clock Generator with Serial I2C Interface
Quad-PLL Programmable Spread Spectrum Clock Generator with Serial I2
C Interface
■ 24-pin QFN package
Features
■ Commercial and industrial temperature ranges
■ Four fully-integrated phase-locked loops (PLLs)
■ One-time programmability
For programming support, contact Cypress technical support
or send an e-mail to clocks@cypress.com
■ Input frequency range
❐ External crystal: 8 to 48 MHz
❐ External reference: 8 to 166 MHz clock
Benefits
■ Wide operating output frequency range
❐ 3 to 166 MHz
■ Serial programmable over two-wire I2C interface
■ Multiple high-performance PLLs allow synthesis of unrelated
frequencies
■ Nonvolatile programming for personalization of PLL
frequencies, spread spectrum characteristics, drive strength,
crystal load capacitance, and output frequencies
■ Programmable spread spectrum with center and down spread
option and Lexmark and Linear modulation profiles
■ VDD supply voltage options:
❐ 2.5 V, 3.0 V, and 3.3 V for CY2545
❐ 1.8 V for CY2547
■ Application-specificprogrammable EMIreductionusing spread
spectrum for clocks
■ Programmable PLLs for system frequency margin tests
■ Selectable output clock voltages independent of VDD supply:
❐ 1.8 V, 2.5 V, 3.0 V, and 3.3 V for CY2545
❐ 1.8 V for CY2547
■ Meets critical timing requirements in complex system designs
■ Suitability for PC, consumer, portable, and networking
■ Power-down, output enable, or frequency select features
■ Low jitter, high accuracy outputs
applications
■ Capable of zero PPM frequency synthesis error
■ Ability tosynthesizenonstandard frequencies with Fractional-N
capability
■ Uninterrupted system operation during clock frequency switch
■ Application compatibility in standard and low-power systems
■ Up to eight clock outputs with programmable drive strength
■ Glitch-free outputs while frequency switching
Functional Description
For a complete list of related documentation, click here.
Logic Block Diagram
CLKIN/RST
Crossbar
Switch
CLK1
XIN/
EXCLKIN
Bank
1
CLK2
Output
OSC
PLL1
PLL2
XOUT
Dividers
and
CLK3
CLK4
CLK5
CLK6
CLK7
CLK8
Bank
2
Drive
Strength
Control
MUX
and
FS
Control
Logic
Bank
3
PLL3
(SS)
SCL
SDA
PLL4
(SS)
I2C
PD#/OE
SSON
Cypress Semiconductor Corporation
Document Number: 001-13196 Rev. *I
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised November 2, 2017