Datasheet > CN8330EPJC

CN8330EPJC

更新时间： 2024-09-17 03:26:11

品牌	Logo	应用领域
科胜讯 - CONEXANT		控制器
页数	文件大小	规格书
101页	571K
描述
DS3/E3 Framer with 52 Mbps HDLC Controller

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

CN8330EPJC 数据手册

CN8330

DS3/E3 Framer with 52 Mbps HDLC Controller

The CN8330 is an integral DS3/E3 framer designed to support the transmission

formats defined by ANSI T1.107-1988, T1.107a-1989, T1.404, and ITU-T G.751

standards. All maintenance features required by Bellcore TR-TSY-000009 and AT&T

PUB 54014 are provided. In addition, the CN8330 can be optionally configured as a

High-Level Data Link Controller (HDLC) usable with or without DS3/E3 framing

overhead.

The CN8330 provides framing recovery for M13, C-bit parity, Syntran, and G.751

E3 formatted signals. A First In First Out (FIFO) buffer in the receive path can be

enabled to reduce jitter on the incoming data. Transmit and receive data is available to

the host in either serial or parallel byte and nibble formats. Access is provided to the

terminal data link and the Far End Alarm/Control (FEAC) channel, as specified in

T1.107a-1989. Counters are included for frame-bit errors, Line Code Violations

(LCVs), parity errors, and Far End Block Errors (FEBEs).

Distinguishing Features

•

Supports DS3/E3 framing modes

Includes high-speed HDLC controller

(52 MHz)

•

Framing recovery for M13, C-bit

parity, Syntran, and G.751 E3 signals

Serial or parallel (octet or nibble)

interface modes

Average reframe time of less than

1 ms for DS3 and less than 250 µs

for E3

•

Supports the LAPD terminal data link

and FEAC channel as defined in

T1.107a-1989

Two operational modes are available: microprocessor and stand-alone monitor

control modes. The microprocessor control mode monitors all status conditions and

provides configuration control. The stand-alone monitor mode allows the CN8330 to

operate as a monitor providing status and alarm information on external pins.

•

68-pin PLCC or 80-pin MQFP

surface-mount package

Operates from a single +5 VDC ±5%

power supply

Low-power CMOS technology

Functional Block Diagram

Applications

•

Digital PCM switches

Digital Cross-Connect Systems

Channel Service Units (CSUs)

Channel extenders

ATM Switches/Concentrators

PBXs

Switched Multimegabit Digital

Service (SMDS) Equipment

Test equipment

Bypass

RXPOS

RXNEG

DS3CKI

RXMSY

CBITO

Unipolar

Conversion

FIFO

Framing

Recovery

RXCCK

TXCKI

RXDAT

RXCLK

FIFO

Enable

•

Routers (including HSSI ports)

Overhead/

Data Link

Processing

Status

Source

Loopback

RDAT[7:0]

RXBCK

Status

PPDL

Receiver

TXPOS

TXNEG

TCLKO

TXBCK

Framing/

Overhead

Insertion

PPDL

Transmitter

Bipolar

Encoder

TDAT[7:0]

Overhead/

Data Link

Processing

TXCCK

CBITI

Line

Loopback

TXCKI

TXDATI

TXSYI

AD[7:0]

Control

To/From

All Blocks

Microprocessor

Interface

Data Sheet

100441E

October 13, 1999

12 3 4 5 6 7...101

中文翻译

下载PDF

与CN8330EPJC相关器件

型号	品牌	获取价格	描述	数据表
CN8330EPJD	CONEXANT	获取价格	DS3/E3 Framer with 52 Mbps HDLC Controller
CN8331	PULSE	获取价格	T3/DS3/E3/STS-1 TRANSFORMERS
CN8332	PULSE	获取价格	T3/DS3/E3/STS-1 TRANSFORMERS
CN8332EXF	ETC	获取价格	PCM Transceiver
CN8333	PULSE	获取价格	T3/DS3/E3/STS-1 TRANSFORMERS
CN8333EXF	ETC	获取价格	PCM Transceiver
CN8380	CONEXANT	获取价格	integrated quad line interface unit unit for both 1.544 Mbps (T1) and 2.048 Mbps (E1) appl
CN8380EPF	CONEXANT	获取价格	integrated quad line interface unit unit for both 1.544 Mbps (T1) and 2.048 Mbps (E1) appl
CN8394KTF	ETC	获取价格	Framer/Formatter
CN8398EVM	CONEXANT	获取价格	integrated quad line interface unit unit for both 1.544 Mbps (T1) and 2.048 Mbps (E1) appl

与CN8330EPJC相关文章

摩尔斯微电子在美国约书亚树国家公园测试 Wi-Fi HaLow
2024-09-18

18
贸泽上架Tallysman TW5386智能GNSS天线
2024-09-18

16
SL74HC10N：高性能三输入与非门解析
2024-09-03

93
AIC1781A 电池充电控制器深度解析
2024-09-03

83

产品中心

服务支持

精选活动

关于我们

帮助中心

CN8330EPJC

CN8330EPJC 数据手册

与CN8330EPJC相关器件

与CN8330EPJC相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

CN8330EPJC

CN8330EPJC 数据手册

与CN8330EPJC相关器件

与CN8330EPJC相关文章

您还可以找

您在本页遇到什么问题？