5秒后页面跳转
捷配首页

Datasheet > AT49BV640T-70TJ
AT49BV640T-70TJ PDF预览

AT49BV640T-70TJ

更新时间： 2024-11-27 15:28:19
品牌 Logo 应用领域
爱特美尔 - ATMEL 光电二极管内存集成电路
页数 文件大小 规格书
30页 376K
描述
Flash, 4MX16, 70ns, PDSO48, 12 X 20 MM, PLASTIC, MO-142DD, TSOP1-48

阅读下载

中文翻译

获取价格

AT49BV640T-70TJ 技术参数

是否Rohs认证： 符合生命周期：Obsolete
零件包装代码：TSOP1包装说明：12 X 20 MM, PLASTIC, MO-142DD, TSOP1-48
针数：48Reach Compliance Code：compliant
ECCN代码：3A991.B.1.AHTS代码：8542.32.00.51
风险等级：5.62最长访问时间：70 ns
启动块：BOTTOM/TOPJESD-30 代码：R-PDSO-G48
JESD-609代码：e3长度：18.4 mm
内存密度：67108864 bit内存集成电路类型：FLASH
内存宽度：16湿度敏感等级：3
功能数量：1端子数量：48
字数：4194304 words字数代码：4000000
工作模式：ASYNCHRONOUS最高工作温度：85 °C
最低工作温度：-40 °C组织：4MX16
封装主体材料：PLASTIC/EPOXY封装代码：TSOP1
封装形状：RECTANGULAR封装形式：SMALL OUTLINE, THIN PROFILE
并行/串行：PARALLEL峰值回流温度（摄氏度）：260
编程电压：2.7 V认证状态：Not Qualified
座面最大高度：1.2 mm最大供电电压 (Vsup)：3.6 V
最小供电电压 (Vsup)：2.7 V标称供电电压 (Vsup)：3 V
表面贴装：YES技术：CMOS
温度等级：INDUSTRIAL端子面层：MATTE TIN
端子形式：GULL WING端子节距：0.5 mm
端子位置：DUAL处于峰值回流温度下的最长时间：40
类型：NOR TYPE宽度：12 mm
Base Number Matches：1

AT49BV640T-70TJ 数据手册

 浏览型号AT49BV640T-70TJ的Datasheet PDF文件第2页浏览型号AT49BV640T-70TJ的Datasheet PDF文件第3页浏览型号AT49BV640T-70TJ的Datasheet PDF文件第4页浏览型号AT49BV640T-70TJ的Datasheet PDF文件第5页浏览型号AT49BV640T-70TJ的Datasheet PDF文件第6页浏览型号AT49BV640T-70TJ的Datasheet PDF文件第7页 
Features  
• 64-megabit (4M x 16) Flash Memory  
• 2.7V - 3.6V Read/Write  
• High Performance  
– Asynchronous Access Time – 70 ns  
– Page Mode Read Time – 20 ns  
• Sector Erase Architecture  
– Eight 4K Word Sectors with Individual Write Lockout  
– 32K Word Main Sectors with Individual Write Lockout  
• Typical Sector Erase Time: 32K Word Sectors – 500 ms; 4K Word Sectors – 100 ms  
• Suspend/Resume Feature for Erase and Program  
– Supports Reading and Programming Data from Any Sector by Suspending Erase  
of a Different Sector  
64-megabit  
(4M x 16)  
– Supports Reading Any Word by Suspending Programming of Any Other Word  
• Low-power Operation  
Page Mode  
2.7-volt Flash  
Memory  
– 30 mA Active  
– 10 µA Standby  
• 1.8V I/O Option Reduces Overall System Power  
• Data Polling and Toggle Bit for End of Program Detection  
• VPP Pin for Write Protection and Accelerated Program/Erase Operations  
• RESET Input for Device Initialization  
• TSOP or CBGA Package  
• Top or Bottom Boot Block Configuration Available  
• 128-bit Protection Register  
• Common Flash Interface (CFI)  
AT49BV640  
AT49BV640T  
Description  
Not Recommended  
The AT49BV640(T) is a 2.7-volt 64-megabit Flash memory. The memory is divided  
into multiple sectors for erase operations. The device can be read or reprogrammed  
off a single 2.7V power supply, making it ideally suited for in-system programming.  
The output voltage can be separately controlled down to 1.65V through the VCCQ  
supply pin. This device can operate in the asynchronous or page read mode.  
for New Design  
Contact Atmel to discuss  
the latest design in trends  
and options  
To increase the flexibility of the device, it contains an Erase Suspend and Program  
Suspend feature. This feature will put the erase or program on hold for any amount of  
time and let the user read data from or program data to any of the remaining sectors.  
The end of a program or an erase cycle is detected by Data Polling or the toggle bit.  
The VPP pin provides data protection and faster programming and erase times. When  
the VPP input is below 0.8V, the program and erase functions are inhibited. When VPP  
is at 1.65V or above, normal program and erase operations can be performed. With  
VPP at 12.0V, the program and erase operations are accelerated.  
With VPP at 12V, a six-byte command (Enter Single Pulse Program Mode) to remove  
the requirement of entering the three-byte program sequence is offered to further  
improve programming time. After entering the six-byte code, only single pulses on the  
write control lines are required for writing into the device. This mode (Single Pulse  
Word Program) is exited by powering down the device, by taking the RESET pin to  
GND or by a high-to-low transition on the VPP input. Erase, Erase Suspend/Resume,  
Program Suspend/Resume and Read Reset commands will not work while in this  
mode; if entered they will result in data being programmed into the device. It is not rec-  
ommended that the six-byte code reside in the software of the final product but only  
exist in external programming code.  
Rev. 3366B–FLASH–8/03  
1234567...30

中文翻译

下载PDF

与AT49BV640T-70TJ相关器件

型号 品牌 获取价格 描述 数据表
AT49BV640T-85CI ATMEL

获取价格

 		Flash, 4MX16, 85ns, PBGA48, 8 X 11 MM, 1.20 MM HEIGHT, 0.80 MM PITCH, CBGA-48
AT49BV640T-85CJ ATMEL

获取价格

 		Flash, 4MX16, 85ns, PBGA48, 8 X 11 MM, 1.20 MM HEIGHT, 0.80 MM PITCH, CBGA-48
AT49BV640T-85TI ATMEL

获取价格

 		Flash, 4MX16, 85ns, PDSO48, 12 X 20 MM, PLASTIC, MO-142DD, TSOP1-48
AT49BV640T-85TJ ATMEL

获取价格

 		Flash, 4MX16, 85ns, PDSO48, 12 X 20 MM, PLASTIC, MO-142DD, TSOP1-48
AT49BV6416 ATMEL

获取价格

 		64-megabit (4M x 16) Page Mode 2.7-volt Flash Memory
AT49BV6416(T) ETC

获取价格

 		AT49BV6416(T)/BN6416(T) Advance Information [Updated 5/03. 38 Pages] 64M bit. 2.7-Volt Bur
AT49BV6416-70TI ATMEL

获取价格

 		64-megabit (4M x 16) Page Mode 2.7-volt Flash Memory
AT49BV6416-70TU ATMEL

获取价格

 		64-megabit (4M x 16) Page Mode 2.7-volt Flash Memory
AT49BV6416-85CI ATMEL

获取价格

 		Flash, 4MX16, 85ns, CBGA55, 8 X 11 MM, 1 MM HEIGHT, 0.75 MM PITCH, CERAMIC, BGA-55
AT49BV6416-85TI ATMEL

获取价格

 		Flash, 4MX16, 85ns, PDSO48, 12 X 20 MM, PLASTIC, MO-142DD, TSOP1-48

与AT49BV640T-70TJ相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证