Data Sheet
ADGM1001/ADGM1002/ADGM1003
0 Hz/DC to 34 GHz, SPDT MEMS Switches
FEATURES
FUNCTIONAL BLOCK DIAGRAM
► ADGM1001: DC to 34 GHz
► ADGM1002: DC to 20 GHz
► ADGM1003: DC to 16 GHz
► Insertion loss (ADGM1001)
► 0.8 dB (typical) at 18 GHz
► 1.5 dB (typical) at 34 GHz
► IIP3: 76 dBm (typical) (ADGM1001)
► Maximum RF power: 33 dBm (ADGM1001)
► On resistance: 3.4 Ω (typical)
► Maximum dc current: 200 mA (ADGM1001)
► Actuation lifetime: 100 million cycles (minimum)
► On switching time (tON): 200 µs (typical)
► Integrated 3.3 V driver for simple control with parallel and SPI
► Independently controllable switches
► Space-saving integrated passive components
► Small, 5.00 mm × 4.00 mm × 0.90 mm, 24-lead LGA package
► Temperature range: –40°C to +85°C
Figure 1.
GENERAL DESCRIPTION
The ADGM1001 is a wideband, single-pole, two-throw (SP2T)
switch, fabricated using Analog Devices, Inc., micro-electromechan-
ical system (MEMS) switch technology. This technology enables a
small form factor, wide RF bandwidth, highly linear, low insertion
loss switch that is operational down to 0 Hz/dc, making it an ideal
solution for a wide range of RF and precision equipment switching
needs. The device is packaged in a 24-lead, 5.00 mm × 4.00 mm ×
0.90 mm, land grid array (LGA) package.
APPLICATIONS
► ATE load and probe boards
► DC and high speed loop back testing
► Relay replacements
► Reconfigurable filters and attenuators
► Military and microwave radios
► Cellular infrastructure: 5G mmWave
An integrated control chip generates the high voltage necessary to
electrostatically actuate the switch via a complementary metal-ox-
ide semiconductor (CMOS)-/low voltage transistor-transistor logic
(LVTTL)-compatible parallel interface. All switches are independent-
ly controllable.
Multifunction pin names may be referenced by their relevant func-
tion only.
► Supports digital standards: PCIe Gen4/Gen5/Gen6, USB 3 and
USB 4, and PAM 4
Table 1. ADGM1001/ADGM1002/ADGM1003 Key Specifications
Maximum RF DC Signal
Power (dBm) Range (V)
Maximum DC
Current (mA)
Model
Bandwidth
ADGM1001
ADGM1002
ADGM1003
DC to 34 GHz 33
DC to 20 GHz 30
DC to 16 GHz 27
±6
±5
±3
200
150
75
COMPANION PRODUCTS
► Quad PMU: AD5522
► SP4T MEMS switches: ADGM1304, ADGM1004
► Low noise, LDO regulators: ADP7142, LT1962, LT3045-1
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to
change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
DOCUMENT FEEDBACK
TECHNICAL SUPPORT