6-O/P 1.8V PCIe Gen 1-2-3 Clock Generator
w/Zo=100ohms
9FGV0641
DATASHEET
General Description
Features/Benefits
The 9FGV0641 is a member of IDT's SOC-Friendly 1.8V
Very-Low-Power PCIe clock family. The device has integrated
100 ohm output terminations providing direction connection to
100 ohm transmission lines. The device also has 6 output
enables for clock management and supports 2 different
spread spectrum levels in addition to spread off.
• LP-HCSL outputs with integrated terminations; save 24
resistors compared to standard PCIe devices
• 54mW typical power consumption; reduced thermal
concerns
• Outputs can optionally be supplied from any voltage
between 1.05V and 1.8V; maximum power savings
• OE# pins; support DIF power management
• Programmable Slew rate for each output; allows tuning for
various line lengths
Recommended Application
1.8V PCIe Gen 1-2-3 Clock Generator
• Programmable output amplitude; allows tuning for various
application environments
Output Features
• 6 - 100MHz Low-Power (LP) HCSL DIF pairs w/Zo=100
• 1 - 1.8V LVCMOS REF output w/Wake-On-LAN (WOL)
support
• DIF outputs blocked until PLL is locked; clean system
start-up
• Selectable 0%, -0.25% or -0.5% spread on DIF outputs;
reduces EMI
• External 25MHz crystal; supports tight ppm with 0 ppm
synthesis error
Key Specifications
• Configuration can be accomplished with strapping pins;
• DIF cycle-to-cycle jitter <50ps
SMBus interface not required for device control
• DIF output-to-output skew <50ps
• DIF phase jitter is PCIe Gen1-2-3 compliant
• REF phase jitter is <1.5ps RMS
• 3.3V tolerant SMBus interface works with legacy controllers
• Selectable SMBus addresses; multiple devices can easily
share an SMBus segment
• Space saving 40-pin 5x5 mm VFQFPN; minimal board
space
Block Diagram
vOE(5:0)#
6
REF1.8
XIN/CLKIN_25
OSC
X2
DIF5
DIF4
SS Capable PLL
DIF3
DIF2
DIF1
DIF0
vSADR
vSS_EN_tri
^CKPWRGD_PD#
CONTROL
LOGIC
SDATA_3.3
SCLK_3.3
9FGV0641 OCTOBER 18, 2016
1
©2016 Integrated Device Technology, Inc.