Source Url Status Check Date: | 2013-06-14 00:00:00 | 是否Rohs认证: | 符合 |
生命周期: | Transferred | 零件包装代码: | SSOP |
包装说明: | 5.30 MM, PLASTIC, SOT-337-1, SSOP-14 | 针数: | 14 |
Reach Compliance Code: | unknown | HTS代码: | 8542.39.00.01 |
风险等级: | 5.07 | 系列: | HCT |
JESD-30 代码: | R-PDSO-G14 | JESD-609代码: | e4 |
长度: | 6.2 mm | 负载电容(CL): | 50 pF |
逻辑集成电路类型: | D FLIP-FLOP | 湿度敏感等级: | 1 |
位数: | 1 | 功能数量: | 2 |
端子数量: | 14 | 最高工作温度: | 125 °C |
最低工作温度: | -40 °C | 输出极性: | COMPLEMENTARY |
封装主体材料: | PLASTIC/EPOXY | 封装代码: | SSOP |
封装形状: | RECTANGULAR | 封装形式: | SMALL OUTLINE, SHRINK PITCH |
峰值回流温度(摄氏度): | 260 | 传播延迟(tpd): | 53 ns |
认证状态: | Not Qualified | 座面最大高度: | 2 mm |
最大供电电压 (Vsup): | 5.5 V | 最小供电电压 (Vsup): | 4.5 V |
标称供电电压 (Vsup): | 5 V | 表面贴装: | YES |
技术: | CMOS | 温度等级: | AUTOMOTIVE |
端子面层: | NICKEL PALLADIUM GOLD | 端子形式: | GULL WING |
端子节距: | 0.65 mm | 端子位置: | DUAL |
处于峰值回流温度下的最长时间: | 30 | 触发器类型: | POSITIVE EDGE |
宽度: | 5.3 mm | 最小 fmax: | 18 MHz |
Base Number Matches: | 1 |
型号 | 品牌 | 获取价格 | 描述 | 数据表 |
74HCT74D-Q100 | NXP |
获取价格 |
HCT SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO14, 3.90 M | |
74HCT74D-Q100 | NEXPERIA |
获取价格 |
Dual D-type flip-flop with set and reset; positive edge-trigger | |
74HCT74D-T | NXP |
获取价格 |
Dual D-type flip-flop with set and reset; positive edge-trigger | |
74HCT74N | NXP |
获取价格 |
Dual D-type flip-flop with set and reset; positive-edge trigger | |
74HCT74N,652 | NXP |
获取价格 |
74HCT74N | |
74HCT74N-B | PHILIPS |
获取价格 |
D Flip-Flop, 2-Func, Positive Edge Triggered, CMOS, PDIP14 | |
74HCT74PW | NXP |
获取价格 |
Dual D-type flip-flop with set and reset; positive-edge trigger | |
74HCT74PW | NEXPERIA |
获取价格 |
Dual D-type flip-flop with set and reset; positive edge-triggerProduction | |
74HCT74PW,112 | NXP |
获取价格 |
74HC(T)74 - Dual D-type flip-flop with set and reset; positive-edge trigger TSSOP 14-Pin | |
74HCT74PW-Q100 | NEXPERIA |
获取价格 |
Dual D-type flip-flop with set and reset; positive edge-trigger |