TPS79718-EP, TPS79730-EP, TPS79733-EP
www.ti.com
SGLS348A–AUGUST 2006–REVISED OCTOBER 2007
ULTRA LOW-POWER, 10 mA, LDO LINEAR REGULATORS WITH POWER GOOD OUTPUT
1
FEATURES
APPLICATIONS
•
Battery-Powered Microcontrollers and
Microprocessors
•
Controlled Baseline
–
–
–
One Assembly Site
One Test Site
DESCRIPTION/ORDERING INFORMATION
One Fabrication Site
The TPS797xx family of low-dropout (LDO) voltage
regulators offers the benefits of low-dropout voltage
and ultralow-power operation. The device is stable
with any capacitor (> 0.47 µF). Therefore,
implementations of this device require little board
space due to the miniaturized packaging and
potentially small output capacitor. In addition, the
family includes an integrated open drain active-high
power good (PG) output. Intended for use in
microcontroller based, battery-powered applications,
•
•
Extended Temperature Performance of
–55°C to 125°C
Enhanced Diminishing Manufacturing Sources
(DMS) Support
•
•
•
•
•
•
•
•
Enhanced Product-Change Notification
Qualification Pedigree(1)
10 mA Low-Dropout Regulator
Ultralow 1.2 µA Quiescent Current at 10 mA
5-Pin SC70/SOT-323 (DCK) Package
Integrated Power Good Output
the
TPS797xx
family's
low
dropout
and
ultralow-powered operation results in a significant
increase in system battery operating life. The small
packaging minimizes consumption of board space.
Stable With Any Capacitor (> 0.47 µF)
The device is enabled when the applied voltage
exceeds the minimum input voltage. The usual PNP
pass transistor has been replaced by a PMOS pass
element. Because the PMOS pass element behaves
as a low-value resistor, the dropout voltage is low,
125 mV (typ) at 10 mA of load current and is directly
proportional to the load current. The quiescent current
is ultralow (1.2 µA typ) and is stable over the entire
range of output load current (0 mA to 10 mA). When
properly configured with a pullup resistor, the PG
output can be used to implement a power-on reset or
low battery indicator. The TPS797xx is offered in
1.8 V, 3 V, and 3.3 V fixed options.
Dropout Voltage Typically 105 mV at 10 mA
(TPS79733)
•
(1)
Overcurrent Limitation
Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
ORDERING INFORMATION(1)
TA
VOLTAGE
1.8 V
PACKAGE(2)
PART NUMBER
TPS79718MDCKREP
SYMBOL
CKW
BUA
TBD
–55°C to 125°C
3 V
SC70/SOT-323 (DCK)
TPS79730MDCKREP
TPS79733MDCKREP(3)
3.3 V
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
(3) Product Preview. Parameters in electrical characteristics are subject to change.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
UNLESS OTHERWISE NOTED this document contains
Copyright © 2006–2007, Texas Instruments Incorporated
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.