5秒后页面跳转
V62/07622-01XE PDF预览

V62/07622-01XE

更新时间: 2024-11-04 12:47:19
品牌 Logo 应用领域
德州仪器 - TI 转换器稳压器开关式稳压器或控制器电源电路开关式控制器
页数 文件大小 规格书
25页 797K
描述
17 V, 1.5 A, SYNCHRONOUS STEP-DOWN CONVERTER

V62/07622-01XE 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:QFN
包装说明:GREEN, PLASTIC, QFN-16针数:16
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01Factory Lead Time:6 weeks
风险等级:5.19Is Samacsys:N
其他特性:PFM CONTROL TECHNIQ IS ALSO AVAILABLE模拟集成电路 - 其他类型:SWITCHING REGULATOR
控制模式:VOLTAGE-MODE控制技术:PULSE WIDTH MODULATION
最大输入电压:17 V最小输入电压:3.1 V
标称输入电压:12 VJESD-30 代码:S-PQCC-N16
JESD-609代码:e4长度:4 mm
湿度敏感等级:2功能数量:1
端子数量:16最高工作温度:125 °C
最低工作温度:-55 °C最大输出电流:2.4 A
最大输出电压:16 V最小输出电压:1.153 V
封装主体材料:PLASTIC/EPOXY封装代码:HVQCCN
封装形状:SQUARE封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
峰值回流温度(摄氏度):260认证状态:Not Qualified
座面最大高度:1 mm表面贴装:YES
切换器配置:BUCK最大切换频率:1100 kHz
温度等级:MILITARY端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式:NO LEAD端子节距:0.65 mm
端子位置:QUAD处于峰值回流温度下的最长时间:NOT SPECIFIED
宽度:4 mmBase Number Matches:1

V62/07622-01XE 数据手册

 浏览型号V62/07622-01XE的Datasheet PDF文件第2页浏览型号V62/07622-01XE的Datasheet PDF文件第3页浏览型号V62/07622-01XE的Datasheet PDF文件第4页浏览型号V62/07622-01XE的Datasheet PDF文件第5页浏览型号V62/07622-01XE的Datasheet PDF文件第6页浏览型号V62/07622-01XE的Datasheet PDF文件第7页 
TPS62110-EP  
TPS62111-EP  
TPS62112-EP  
www.ti.com .............................................................................................................................................................. SLVS630CAPRIL 2007REVISED MAY 2008  
17 V, 1.5 A, SYNCHRONOUS STEP-DOWN CONVERTER  
1
FEATURES  
2
Controlled Baseline  
20 µA Quiescent Current (Typical)  
Overtemperature and Overcurrent Protected  
Available in 16 Pin QFN Package  
One Assembly  
One Test Site  
One Fabrication Site  
Extended Temperature Performance of –55°C  
to 125°C  
APPLICATIONS  
Point-of-Load Regulation From 12 V Bus  
Organizers, PDAs, and Handheld PCs  
Handheld Scanners  
Enhanced Diminishing Manufacturing Sources  
(DMS) Support  
Enhanced Product-Change Notification  
Qualification Pedigree  
High-Efficiency Synchronous Step-Down  
Converter With up to 95% Efficiency  
TYPICAL APPLICATION  
6.8 mH  
V
= 3.8 V to 17 V  
3.1 V to 17 V Operating Input Voltage Range  
I
TPS62111  
VIN  
VIN  
EN  
SW  
SW  
V = 3.3 V  
O
Adjustable Output Voltage Range From  
1.2 V to 16 V  
1 M  
PG  
LBO  
FB  
VINA  
C
= 10 mF  
1 mF  
I
CO = 22 mF  
25 V  
Fixed Output Voltage Options Available in  
3.3 V and 5 V  
6.3 V  
AGND  
LBI  
SYNC  
Synchronizable to External Clock Signal up to  
1.4 MHz  
GND GND PwPD PGND PGND  
Up to 1.5 A Output Current  
High Efficiency Over a Wide Load Current  
Range Due to PFM/PWM Operation Mode  
100% Maximum Duty Cycle for Lowest Dropout  
Component qualification in accordance with JEDEC and industry  
standards to ensure reliable operation over an extended  
temperature range. This includes, but is not limited to, Highly  
Accelerated Stress Test (HAST) or biased 85/85, temperature  
cycle, autoclave or unbiased HAST, electromigration, bond  
intermetallic life, and mold compound life. Such qualification testing  
should not be viewed as justifying use of this component beyond  
specifiedperformance and environmental limits.  
DESCRIPTION/ORDERING INFORMATION  
The TPS6211x devices are a family of low-noise synchronous step-down dc-dc converters that are ideally suited  
for systems powered from a 2-cell Li-ion battery or from a 12 V or 15 V rail.  
The TPS6211x is a synchronous PWM converter with integrated N-channel and P-channel power MOSFET  
switches. Synchronous rectification is used to increase efficiency and to reduce external component count. To  
achieve highest efficiency over a wide load current range, the converter enters a power-saving, pulse-frequency  
modulation (PFM) mode at light load currents. Operating frequency is typically 1 MHz, allowing the use of small  
inductor and capacitor values. The device can be synchronized to an external clock signal in the range of 0.8  
MHz to 1.4 MHz. For low noise operation, the converter can be operated in PWM-only mode. In the shutdown  
mode, the current consumption is reduced to less than 2 µA. The TPS6211x is available in the 16 pin (RSA)  
QFN package, and operates over a free-air temperature range of –55°C to 125°C.  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
2
PowerPAD is a trademark of Texas Instruments.  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2007–2008, Texas Instruments Incorporated  

V62/07622-01XE 替代型号

型号 品牌 替代类型 描述 数据表
TPS62110MRSAREP TI

类似代替

17 V, 1.5 A, SYNCHRONOUS STEP-DOWN CONVERTER
TPS62110RSAT TI

类似代替

17-V, 1.5-A, SYNCHRONOUS STEP-DOWN CONVERTER
TPS62110RSAR TI

类似代替

17-V, 1.5-A, SYNCHRONOUS STEP-DOWN CONVERTER

与V62/07622-01XE相关器件

型号 品牌 获取价格 描述 数据表
V62/07622-02XE TI

获取价格

17 V, 1.5 A, SYNCHRONOUS STEP-DOWN CONVERTER
V62/07622-03XE TI

获取价格

17 V, 1.5 A, SYNCHRONOUS STEP-DOWN CONVERTER
V62/07623-01XE TI

获取价格

LOW-POWER SINGLE SCHMITT-TRIGGER BUFFER
V62/07624-01XE TI

获取价格

DUAL 4-A HIGH-SPEED LOW-SIDE MOSFET DRIVER WITH ENABLE
V62/07624-02YE TI

获取价格

DUAL 4-A HIGH-SPEED LOW-SIDE MOSFET DRIVER WITH ENABLE
V62/07625-01XE TI

获取价格

SINGLE INVERTER GATE
V62/07626-01XE TI

获取价格

SINGLE SCHMITT-TRIGGER INVERTER
V62/07627-01XE TI

获取价格

增强型产品四路 LVDS 变送器 | D | 16 | -55 to 125
V62/07630-01XE TI

获取价格

12 BIT ASYNCHRONOUS BINARY COUNTERS
V62/07631-01XE TI

获取价格

DUAL 2-INPUT POSITIVE-AND GATE